Shively Labs FM Antennas and Accessories

	188 Harrison Rd., P.O. Box 389, Bridgton, Maine 04009 USA 207-647-3327; 888-SHIVELY (888-744-8359); FAX 207-647-8273 5 PM - 8 AM Eastern, emergencies only please - cell: (207) 329-5118
Employee Webmail	Shively E-Mail

Antenna models
Typical elevation patterns
Icing Protection:	Radomes
	De-Icers
Transformers
Related Information:	Tech bulletins
	Tech sheets

Shows
Visit our Jon Clark at Booth #712 at NRB, February 18-21, at the Gaylord Opryland Resort & Convention Ctr. in Nashville, TN.
Shively News
David Allen takes the helm as President of Howell Laboratories and Shively Labs.
Shively Labs forms new partnerships with EMC of Brazil and BWPSI of the Philippines.
Partnering with Ideal Antenas of Brazil.
Our freshly redesigned Model 2914 bandpass filter can now handle up to 1 kW input power!
Awards
Shively Labs has won a techINK 2010 Innovation Award for our Graphical Power Meter system!
Our Model 6020 antenna brings home the Radio World Coolstuff Award!
Articles
September-October 2011 Radio Guide article: "Shively Labs - Where FM Antennas Are Not Just a Sideline"
May-June 2008 Radio Guide article: "Shively Labs Meets the Very Windy Mountain" September 2007 Radio Guide articles: "Shively Labs: Antennas That Work!" [279 kB] "Shively 6014 Dual Hybrid Antenna Solves a Dilemma" [232 kB]
Archived articles

6-1/8" Non-Flanged Coax Components

NOTES

All 6-1/8" components meet EIA standards for inner and outer conductor dimensions for 50-Ω components.
All insulators are made from virgin PTFE.
See technical bulletin "tb-linespecs" for complete transmission line specifications.
See technical bulletin "tb-coax_cutback" for inner to outer cutback dimensions.

Performance:		Dimensions:
Impedance:	50 ohms	Outer Conductor	Outside diameter:	6.125" (15.5 cm)
Maximum Frequency:	850 MHz		Inside diameter:	5.981" (15.1 cm)
Velocity Percent:	99.8%	Inner Conductor	Outside diameter:	2.600" (6.6 cm)
Peak Power Rating:	1600 kW		Inside diameter:	2.520" (6.4 cm)
Average Power Rating:	See technical bulletin.
Attenuation:	See technical bulletin.

Transmission Line
Non-flanged both ends

Each transmission line section comes without hardware or O-rings. Insulators are placed approximately 48 " apart to prevent sagging.

20 ft (240" or 6.10 m) long 618NF-102 Standard cutback Approximate weight: 130 lb (59.1 kg) Approximate shipping weight: 160 lb (72.7 kg)	Click picture for dimensions.
10 ft (120" or 3.05 m) long 618NF-101 Standard cutback Approximate weight: 65 lb (29.6 kg) Approximate shipping weight: 80 lb (36.4 kg)
Cut length xx.xxx inches 618NF-103-xx.xxx Standard cutback Approximate weight: 6.5 lb/ft (9.7 kg/m) Approximate shipping weight: 7.8 lb lb/ft (11.6 kg/m)

20 ft (240" or 6.10 m) long
618NF-102

Standard cutback
Approximate weight: 130 lb (59.1 kg)
Approximate shipping weight: 160 lb (72.7 kg)

Click picture for dimensions.

10 ft (120" or 3.05 m) long
618NF-101

Standard cutback
Approximate weight: 65 lb (29.6 kg)
Approximate shipping weight: 80 lb (36.4 kg)

Cut length xx.xxx inches
618NF-103-xx.xxx

Standard cutback
Approximate weight: 6.5 lb/ft (9.7 kg/m)
Approximate shipping weight: 7.8 lb lb/ft (11.6 kg/m)

Elbows

Each elbow comes with one flange hardware kit (618F-14) and one O-ring (618F-13S). Elbows come standard with swivel flanges and male/female connections.

90° equal legs 618NF-302 Standard cutback. Approximate weight: 9-3/4 lb (4.4 kg) Approximate shipping weight: 10-3/4 lb (4.9 kg)	Click picture for dimensions.

90° equal legs
618NF-302

Standard cutback.
Approximate weight: 9-3/4 lb (4.4 kg)
Approximate shipping weight: 10-3/4 lb (4.9 kg)

Click picture for dimensions.

Non-Flanged Line Connectors

Use with 6-1/8" EIA non-flanged line. Connectors are silver-plated. Non-pressurizable; indoor use only.

Inner conductor connector 618NF-530 Inner conductor only. Connector silver-plated. Not supported. Approximate weight: 1 lb (0.5 kg) Approximate shipping weight: 1-1/2 lb (0.7 kg)	Click picture for dimensions.

Inner conductor connector
618NF-530

Inner conductor only.
Connector silver-plated.
Not supported.
Approximate weight: 1 lb (0.5 kg)
Approximate shipping weight: 1-1/2 lb (0.7 kg)

Click picture for dimensions.

	Slip coupling 618NF-520 Outer conductor only. Indoor use only - not pressurized. Approximate weight: 3 lb (1.4 kg) Approximate shipping weight: 3-3/4 lb (1.7 kg)

Slip coupling
618NF-520

Outer conductor only.
Indoor use only - not pressurized.
Approximate weight: 3 lb (1.4 kg)
Approximate shipping weight: 3-3/4 lb (1.7 kg)

Connector Assembly 618NF-570 Inner and outer conductors. Connector silver-plated. Indoor use only - not pressurized. Approximate weight: 7 lb (3.2 kg) Approximate shipping weight: 8 lb (3.6 kg)	Click picture for dimensions.

Connector Assembly
618NF-570

Inner and outer conductors.
Connector silver-plated.
Indoor use only - not pressurized.
Approximate weight: 7 lb (3.2 kg)
Approximate shipping weight: 8 lb (3.6 kg)

Click picture for dimensions.

Conversion "Field" Flanges and Anchor Connector

To convert from flanged to non-flanged line. Each flange comes with one flange hardware kit and one O-ring.

Clamp-type 618F-901 Standard cutback. Indoor use only - not pressurized. Approximate weight: 6 lb (2.7 kg) Approximate shipping weight: 6-1/2 lb (3.0 kg)

Clamp-type
618F-901

Standard cutback.
Indoor use only - not pressurized.
Approximate weight: 6 lb (2.7 kg)
Approximate shipping weight: 6-1/2 lb (3.0 kg)

	Fixed flange 618F-902 Soft-solder type. Can be pressurized. Approximate weight: tbd Approximate shipping weight: tbd	Click picture for dimensions.

Fixed flange
618F-902

Soft-solder type.
Can be pressurized.
Approximate weight: tbd
Approximate shipping weight: tbd

Click picture for dimensions.

Swivel flange 618F-903 Soft-solder type. Can be pressurized. Approximate weight: 6 lb (2.7 kg) Approximate shipping weight: 6-3/4 lb (3.1 kg)

Swivel flange
618F-903

Soft-solder type.
Can be pressurized.
Approximate weight: 6 lb (2.7 kg)
Approximate shipping weight: 6-3/4 lb (3.1 kg)

	Anchor connector 618F-501 Inner conductor connector for 6-1/8" flanged connection. Connectors are silver-plated. Approximate weight: 3-1/2 lb (1.6 kg) Approximate shipping weight: 4 lb (1.8 kg)	Click picture for dimensions.

Anchor connector
618F-501

Inner conductor connector for 6-1/8" flanged connection.
Connectors are silver-plated.
Approximate weight: 3-1/2 lb (1.6 kg)
Approximate shipping weight: 4 lb (1.8 kg)

Click picture for dimensions.

Spare Parts

Hose clamp 618F-020 Fits 6-1/8" transmission line. Included with components.

Hose clamp
618F-020

Fits 6-1/8" transmission line.
Included with components.

Patch Panels

Note that interlock micro switches, P/N 82INT, are sold separately. See below.

3-Port, 1 U-bend 618NF-PP3		Click picture for dimensions.

	4-Port, 2 U-bends 618NF-PP4		Click picture for dimensions.

Patch panel interlock micro-switch 82INT Double-pole double-throw.

Patch panel interlock micro-switch
82INT

Double-pole double-throw.

Bandpass filters
Notch filters
Branched combiners
Balanced combiners
Directional couplers
Low-level group delay equalizers
Related information:	Tech bulletins
	Tech sheets
	Calculators

Shively Is Different!
IBOC filter modules:	Medium-power
	Low-power
	Very-low-power
Digital injectors
Interleaved A/D antenna
Related information:	Tech bulletins
	Tech sheets
	Calculators
Shively filter selected for HD Radio™ demo in France. (May '06)
4 Times Square expands with new interdigital technology. (July '05)
Revolutionary IBOC test at Cougar Mountain. (August '02)

Type "N"
7/8"		Flanged	Non-flanged
1-5/8"		Flanged	Non-flanged
3-1/8"		Flanged	Non-flanged
4-1/16"		Flanged	Non-flanged
6-1/8"		Flanged	Non-flanged
Cross-references:
	Old part numbers to new
	From Myat part numbers
	From Dielectric part numbers
	From SWR part numbers
Related tech bulletins:
	Coax components specifications
	Patch panel dimensions (425 kB)
CAUTION: All components are designed for use up to 108 MHz unless otherwise specified. Please contact Shively Labs for UHF components.

6-1/8" Non-Flanged Coax Components

Performance:

Dimensions:

Transmission LineNon-flanged both ends

20 ft (240" or 6.10 m) long618NF-102

Click picture for dimensions.

10 ft (120" or 3.05 m) long618NF-101

Cut length xx.xxx inches618NF-103-xx.xxx

Elbows

90° equal legs618NF-302

Click picture for dimensions.

Non-Flanged Line Connectors

Inner conductor connector618NF-530

Click picture for dimensions.

Slip coupling618NF-520

Connector Assembly618NF-570

Conversion "Field" Flanges and Anchor Connector

Clamp-type618F-901

Fixed flange618F-902

Click picture for dimensions.

Swivel flange618F-903

Anchor connector618F-501

Click picture for dimensions.

Spare Parts

Hose clamp618F-020

Patch Panels

Note that interlock micro switches, P/N 82INT, are sold separately. See below.

3-Port, 1 U-bend618NF-PP3

Click picture for dimensions.

4-Port, 2 U-bends618NF-PP4

Click picture for dimensions.

Patch panel interlock micro-switch82INT

Last updated: 01/31/12 Webmaster: Al Friend © copyright 2006-2012 Howell Laboratories, Inc.

Transmission Line
Non-flanged both ends

20 ft (240" or 6.10 m) long
618NF-102

10 ft (120" or 3.05 m) long
618NF-101

Cut length xx.xxx inches
618NF-103-xx.xxx

90° equal legs
618NF-302

Inner conductor connector
618NF-530

Slip coupling
618NF-520

Connector Assembly
618NF-570

Clamp-type
618F-901

Fixed flange
618F-902

Swivel flange
618F-903

Anchor connector
618F-501

Hose clamp
618F-020

3-Port, 1 U-bend
618NF-PP3

4-Port, 2 U-bends
618NF-PP4

Patch panel interlock micro-switch
82INT

Last updated: 01/31/12
Webmaster: Al Friend
© copyright 2006-2012 Howell Laboratories, Inc.