 |
207-647-3327; 888-SHIVELY (888-744-8359); FAX 207-647-8273 5 PM - 8 AM Eastern, emergencies only please - cell: (207) 329-5118 |
|
| Employee Webmail | Shively E-Mail | |
|---|---|---|
|
207-647-3327; 888-SHIVELY (888-744-8359); FAX 207-647-8273 5 PM - 8 AM Eastern, emergencies only please - cell: (207) 329-5118 |
|
| Employee Webmail | Shively E-Mail | |
|---|---|---|
| Antenna models | |
| Typical elevation patterns | |
| Form for submitting tower information | |
| Icing Protection: | Radomes |
| De-Icers | |
| Transformers | |
| Related Information: | Tech bulletins |
| Tech sheets | |
| Bandpass filters | |
| Notch filters | |
| Branched combiners | |
| Balanced combiners | |
| Directional couplers | |
| Power splitters | |
| Low-level group delay equalizers | |
| Related information: | Tech bulletins |
| Tech sheets | |
| Calculators | |
| Shively Is Different! | |
| IBOC filter modules: | Medium-power |
| Low-power | |
| Very-low-power | |
| Digital injectors | |
| Interleaved A/D antenna | |
| Related information: | Tech bulletins |
| Tech sheets | |
| Calculators | |
| Shively filter selected for HD Radio™ demo in France. (May '06) | |
| 4 Times Square expands with new interdigital technology. (July '05) | |
| Revolutionary IBOC test at Cougar Mountain. (August '02) | |
| Shively's position on Dielectric's IBOC patents. | |
| CAUTION: All components are designed for use up to 108 MHz unless otherwise specified. Please contact Shively Labs for UHF components. | ||||
| Type "N" | ||||
| 7/8" | Flanged | Non-flanged | ||
| 1-5/8" | Flanged | Non-flanged | ||
| 3-1/8" | Flanged | Non-flanged | ||
| 4-1/16" | Flanged | Non-flanged | ||
| 6-1/8" | Flanged | Non-flanged | ||
| Cross-references: | ||||
| Old part numbers to new | ||||
| From Myat part numbers | ||||
| From Dielectric part numbers | ||||
| From SWR part numbers | ||||
| Related tech bulletins: | ||||
| Coax components specifications | ||||
| Patch panel dimensions (425 kB) | ||||
| Motorized transfer switches |
| Directional couplers |
| Digital injectors |
| Power splitters |
| Low-level group delay equalizers |
|
|
|
|
| Calculators |
| Tough terrain, wicked weather, maximum coverage – nobody does it better! |
|
Shively Olde-to-New Coax Part Number Cross-Reference |
| CAUTION | There are no EIA standards for 4-1/6" coax. Many configurations from different manufacturers exist in the field, and new components may not bolt up to existing systems. Contact Shively for recommendations on 4-1/16" components. |
|---|---|
| NOTES | Part numbers are new, effective July 2005. |
| Flange hardware and O-rings are provided with all flanged components. |
Transmission Line(flanged includes one set flange hardware and O-ring) |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8" flanged both ends, M-F, 20 feet | 1113-1 | 078F-2 | |
| 7/8" flanged both ends, M-F, 6 feet | 1113-2 (72) | 078F-1 | |
| 7/8" flanged both ends, M-F, xx.xxx" cut length | 1113-2 (xx.xxx) | 078F-12-xx.xxx | |
| 7/8" flanged both ends, F-F, 3-1/2 " long, with swivel flange one end ("spool piece") | 1113-88; 078F-88 |
078F-188 | |
| 7/8" flanged one end, 20 feet | 1113-1N | 078F-2N | |
| 7/8" flanged one end, xx.xxx" cut length | 1113-2N (xx.xxx) | 078F-11-xx.xxx | |
| 7/8" non-flanged, 20 feet | 1103-1 | 078NF-2 | |
| 7/8" non-flanged, 6 feet | 1103-2 (72) | 078NF-1 | |
| 7/8" non-flanged, xx.xxx" cut length | 1103-2 (xx.xxx) | 078NF-12-xx.xxx | |
| 1-5/8" flanged both ends, M-F, 20 feet | 1213-1; 158F-2 |
158F-102 | |
| 1-5/8" flanged both ends, M-F, 10 feet | 1213-2 (120) | 158F-1 | |
| 1-5/8" flanged both ends, M-F, xx.xxx " cut length | 1213-2 (xx.xxx) | 158F-12-xx.xxx | |
| 1-5/8" flanged both ends, F-F, 6" long, with swivel flange one end ("spool piece") | 1213-88; 158F-88 |
158F-188 | |
| 1-5/8" flanged one end, 20 feet | 1213-1N | 158F-2N | |
| 1-5/8" flanged one end, xx.xxx" cut length | 1213-2N (xx.xxx) | 158F-11-xx.xxx | |
| 1-5/8" non-flanged, 20 feet | 1203-1 | 158NF-2 | |
| 1-5/8" non-flanged, 10 feet | 1203-2 (120) | 158NF-1 | |
| 1-5/8" non-flanged, xx.xxx" cut length | 1203-2 (xx.xxx) | 158NF-12-xx.xxx | |
| 3-1/8" flanged both ends, M-F, 20 feet | 1313-1 | 318F-2 | |
| 3-1/8" flanged both ends, M-F, 10 feet | 1313-2 (120) | 318F-1 | |
| 3-1/8" flanged both ends, M-F, xx.xxx" cut length | 1313-2 (xx.xxx) | 318F-12-xx.xxx | |
| 3-1/8" flanged both ends, F-F, 6" long, with swivel flange one end ("spool piece") | 1313-88; 318F-88 |
318F-188 | |
| 3-1/8" flanged one end, 20 feet | 1313-1N | 318F-2N | |
| 3-1/8" flanged one end, M, xx.xxx" cut length | 1313-2N (xx.xxx) | 318F-11-xx.xxx | |
| 3-1/8" non-flanged, 20 feet | 1303-1 | 318NF-2 | |
| 3-1/8" non-flanged, 10 feet | 1303-2 (120) | 318NF-1 | |
| 3-1/8" non-flanged, xx.xxx" cut length | 1303-2 (xx.xxx) | 318NF-12-xx.xxx | |
| 4-1/16" flanged both ends, M-F, 20 feet | 1413-1 | 416F-2 | |
| 4-1/16" flanged both ends, M-F, 10 feet | 1413-2 (120) | 416F-1 | |
| 4-1/16" flanged both ends, M-F, xx.xxx" cut length | 1413-2 (xx.xxx) | 416F-12-xx.xxx | |
| 4-1/16" flanged both ends, F-F, 6" long, with swivel flange one end ("spool piece") | 1413-88 | 416F-88 | |
| 4-1/16" flanged one end, 20 feet | 1413-1N | 416F-2N | |
| 4-1/16" flanged one end, xx.xxx" cut length | 1413-2N (xx.xxx) | 416F-11-xx.xxx | |
| 4-1/16" non-flanged, 20 feet | 1403-1 | 416NF-2 | |
| 4-1/16" non-flanged, 10 feet | 1403-2 (120) | 416NF-1 | |
| 4-1/16" non-flanged, xx.xxx" cut length | 1403-2 (xx.xxx) | 416NF-12-xx.xxx | |
| 6-1/8" flanged both ends, M-F, 20 feet | 1613-1 | 618F-2 | |
| 6-1/8" flanged both ends, M-F, 10 feet | 1613-2 (120) | 618F-1 | |
| 6-1/8" flanged both ends, M-F, xx.xxx" cut length | 1613-2 (xx.xxx) | 618F-12-xx.xxx | |
| 6-1/8" flanged both ends, F-F, 6" long, with swivel flange one end ("spool piece") | 1613-88 | 618F-88 | |
| 6-1/8" flanged one end, 20 feet | 1613-1N | 618F-2N | |
| 6-1/8" flanged one end, xx.xxx" cut length | 1613-2N (xx.xxx) | 618F-11-xx.xxx | |
| 6-1/8" non-flanged, 20 feet | 1603-1; 618NF-2 |
618NF-102 | |
| 6-1/8" non-flanged, 10 feet | 1603-2 (120); 618NF-1 |
618NF-101 | |
| 6-1/8" non-flanged, xx.xxx " cut length | 1603-2 (xx.xxx); 618NF-12-xx.xxx |
618NF-103-xx.xxx | |
Adapter-Reducer |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8" flange to Type "N" female | 1113-60N (F) | 078F-60 | |
| 7/8" flange to 7-16 DIN male | 1113-61 | 078F-61 | |
| 1-5/8" flange to Type "N" female, aluminum | 158F-60-A | ||
| 1-5/8" flange to Type "N" female, brass | 1213-60N (F); 158F-60-B |
158F-600 | |
| 1-5/8" flange to Type "N" male, brass | 158F-60-BM | ||
| 1-5/8" non-flanged to Type "N" female | 1203-60 | 158NF-60 | |
| 1-5/8" flange to 7/8" flange | 1213-61 | 158F-61 | |
| 1-5/8" non-flanged to 7/8" non-flanged | 1203-61; 158NF-61 |
158NF-620 | |
| 3-1/8" flange to Type "N" female, brass | 1313-60N (F); 318F-60-B |
318F-600 | |
| 3-1/8" flange to Type "N" female, aluminum | 1313-60N (F); 318F-60-A |
318F-601 | |
| 3-1/8" non-flanged to Type "N" female | 1303-60 | 318NF-60 | |
| 3-1/8" flange to 7/8" flange, brass | 1313-61; 318F-61 |
318F-620 | |
| 3-1/8" flange to 1-5/8" flange | 1313-62; 318F-62 |
318F-630 | |
| 3-1/8" non-flanged to 7/8" non-flanged | 318NF-61 | ||
| 3-1/8" non-flanged to 1-5/8" non-flanged | 1303-62 | 318NF-62 | |
| 4-1/16" flange to Type "N" female | 1413-60N (F) | 416F-60 | |
| 4-1/16" flange to 1-5/8" flange | 1413-62 | 618F-62 | |
| 4-1/16" flange to 3-1/8" flange | 1413-63; 416F-63 |
416F-640 | |
| 6-1/8" flange to Type "N" female | 1613-60N (F) | 618F-60 | |
| 6-1/8" flange to 3-1/8" flange | 1613-63 | 618F-63 | |
| 6-1/8" flange to 4-1/16" flange | 1613-64 | 618F-64 | |
Elbow(includes one set flange hardware and O-ring) |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8" flanged, 90° unequal legs M-F | 1113-3F | 078F-3F | |
| 7/8" non-flanged, 90° unequal legs | 1303-3; 078NF-3 |
078NF-301 | |
| 1-5/8" flanged, 90° equal legs, standard M-F | 158F-302 | ||
| 1-5/8" flanged, 90° unequal legs, standard M-F | 158F-301 | ||
| 1-5/8" flanged, 90° equal legs, Shively-style M-F | 1213-3F; 158F-3F |
158F-322 | |
| 1-5/8" flanged, 45° equal legs, M-F | 1213-4F | 158F-4F | |
| 1-5/8" non-flanged, 90° equal legs, standard | 158NF-302 | ||
| 1-5/8" non-flanged, 90° unequal legs, standard | 158NF-301 | ||
| 1-5/8" non-flanged, 90° unequal legs, Shively-style | 1203-3 | 158NF-3 | |
| 1-5/8" non-flanged, 45° unequal legs | 1203-4 | 158NF-4 | |
| 3-1/8" flanged, 90° M-F, equal legs, standard cutback | 318F-302 | ||
| 3-1/8" flanged, 90° M-F, unequal legs, standard cutback | 318F-301 | ||
| 3-1/8" flanged, 90° M-F, equal legs, Shively cutback | 1313-3F; 318F-3F |
318F-322 | |
| 3-1/8" flanged, 45° M-F, equal legs | 1313-4F | 318F-4F | |
| 3-1/8" non-flanged, 90° equal legs, standard | 318NF-302 | ||
| 3-1/8" non-flanged, 90° unequal legs, standard | 318NF-301 | ||
| 3-1/8" non-flanged, 90° unequal legs, Shively-style | 1303-3; 318NF-3 |
318NF-321 | |
| 3-1/8" non-flanged, 45° unequal legs | 1303-4 | 318NF-4 | |
| 4-1/6" flanged, 90° equal legs | 1413-3F; 416F-3F |
416F-302 | |
| 4-1/6" flanged, 45° equal legs | 1413-4F | 416F-4F | |
| 4-1/6" non-flanged, 90° unequal legs, Shively-style | 1403-3; 416NF-3 |
416NF-321 | |
| 4-1/6" non-flanged, 45° unequal legs | 1403-4 | 416NF-4 | |
| 6-1/8" flanged, 90° equal legs, non-reinforced (M-F) | 1613-3F; 618F-3F |
618F-322 | |
| 6-1/8" flanged, 45° equal legs (M-F) | 1613-4F | 618F-4F | |
| 6-1/8" non-flanged, 90° unequal legs, Shively cutback | 1603-3; 618NF-3 |
618NF-321 | |
| 6-1/8" non-flanged, 45° unequal legs | 1603-4 | 618NF-4 | |
Tee, Flanged(includes three sets flange hardware and O-rings) |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8" x 7/8" x 7/8" (female-female-female, with swivel flanges) |
1113-18 | 078F-18 | |
| 1-5/8" x 7/8" x 7/8" (female-female-female, with swivel flanges) |
1113-18B | 158F-18B | |
| 1-5/8" x 1-5/8" x 1-5/8" (female-female-female, with swivel flanges) |
1213-18 | 158F-18 | |
| 3-1/8" x 1-5/8" x 1-5/8" (male-male-male, with swivel flanges) |
1213-18B | 318F-18B | |
| 3-1/8" x 3-1/8" x 3-1/8" (male-male-male, with swivel flanges) |
1313-18 | 318F-18 | |
| 4-1/16" x 3-1/8" x 3-1/8" (female-male-male, with swivel flanges) |
1313-18B | 416F-18B | |
| 4-1/16" x 4-1/16 " x 4-1/16 " (female-male-male, with swivel flanges) |
1413-18 | 416F-18 | |
| 6-1/8" x 4-1/16 " x 4-1/16 " (female-male-male, with swivel flanges) |
1413-18B | 618F-18B | |
| 6-1/8" x 6-1/8" x 6-1/8" (female-male-male, with swivel flanges) |
1613-18 | 618F-18 | |
Field Flange(includes flange hardware and O-ring) |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8" swivel, soft-solder type | 1113-9FS | 078F-9FS | |
| 7/8" fixed, soft-solder type | 1113-9FF | 078F-9FF | |
| 7/8" clamp-type | 1113-9C; 158F-9C |
078F-990 | |
| 1-5/8" swivel, soft-solder type, standard cutback | 158F-903 | ||
| 1-5/8" swivel, soft-solder type, Shively cutback | 1213-9FS | 158F-9FS | |
| 1-5/8" fixed, soft-solder type, standard cutback | 158F-902 | ||
| 1-5/8" fixed, soft-solder type, Shively cutback | 1213-9FF | 158F-9FF | |
| 1-5/8" clamp-type, standard cutback | 158F-901 | ||
| 1-5/8" clamp-type, Shively cutback | 1213-9C | 158F-9C | |
| 3-1/8" clamp-type, standard cutback | 318F-901 | ||
| 3-1/8" fixed, soft-solder type, standard cutback | 318F-902 | ||
| 3-1/8" swivel, soft-solder type, standard cutback | 318F-903 | ||
| 3-1/8" clamp-type, Shively cutback | 1313-9C; 318F-9C | 318F-990 | |
| 3-1/8" swivel, soft-solder type, Shively cutback | 1313-9FS | 318F-9FS | |
| 3-1/8" fixed, soft-solder type, Shively cutback | 1313-9FF | 318F-9FF | |
| 4-1/16" swivel, soft-solder type | 1413-9FS | 416F-9FS | |
| 4-1/16" fixed, soft-solder type | 1413-9FF | 416F-9FF | |
| 4-1/16" clamp-type | 1413-9C | 416F-9C | |
| 6-1/8" swivel, soft-solder type | 1613-9FS | 618F-9FS | |
| 6-1/8" fixed, soft-solder type | 1613-9FF | 618F-9FF | |
| 6-1/8" clamp-type, Shively cutback | 1613-9C; 618F-9C |
618F-990 | |
Fixed Flange(includes flange hardware and O-ring) |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8", weld or silver-braze type, Shively cutback | 1113-9F | 078F-9F | |
| 1-5/8", weld or silver-braze type, Shively cutback | 1213-9F; 158F-9F |
158F-920 | |
| 3-1/8", weld or silver-braze type, standard cutback | 318F-925 | ||
| 3-1/8", weld or silver-braze type, Shively cutback | 1313-9F; 318F-9F |
318F-920 | |
| 4-1/16", weld or silver-braze type, Shively cutback | 1413-9F | 416F-9F | |
| 6-1/8", weld or silver-braze type, Shively cutback | 1613-9F | 618F-9F | |
Swivel Flange and Follower(includes flange hardware and O-ring) |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8", weld or silver-braze type | 1113-9S | 078F-9S | |
| 1-5/8", weld or silver-braze type, standard cutback | 158F-926 | ||
| 1-5/8", weld or silver-braze type, Shively cutback | 1213-9S | 158F-9S | |
| 3-1/8", weld or silver-braze type, standard cutback | 318F-926 | ||
| 3-1/8", weld or silver-braze type, Shively cutback | 1313-9S | 318F-9S | |
| 4-1/16", weld or silver-braze type | 1413-9S | 416F-9S | |
| 6-1/8", weld or silver-braze type | 1613-9S | 618F-9S | |
Gas Stop(includes flange hardware and O-ring) |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8" | 1113-7 | 078F-7 | |
| 1-5/8" | 1213-7; 158F-7 |
158F-701 | |
| 3-1/8" | 1313-7 | 318F-7 | |
| 4-1/16" | 1413-7 | 416F-7 | |
| 6-1/8" | 1613-7 | 618F-7 | |
Anchor Connector |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8" | 1113-5 | 078F-5 | |
| 1-5/8" | 1213-5; 158F-5 |
158F-501 | |
| 3-1/8" | 1313-5; 318F-5 |
318F-501 | |
| 4-1/16" | 1413-5 | 416F-5 | |
| 6-1/8" | 1613-5; 618F-5 |
618F-501 | |
Pressure Cap(includes flange hardware and O-ring) |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 1-5/8" Female | 1213-6F | 158F-6F | |
| 1-5/8" Male | 1213-6M | 158F-6M | |
| 3-1/8" Female | 1313-6F | 318F-6F | |
| 3-1/8" Male | 1313-6M | 318F-6M | |
| 4-1/16" Female | 1413-6F | 416F-6F | |
| 4-1/16" Male | 1413-6M | 416F-6M | |
| 6-1/8" Female | 1613-6F | 618F-6F | |
| 6-1/8" Male | 1613-6M | 618F-6M | |
Inner Conductor Connector |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8", EIA Standard | 1103-5; 078NF-5 |
078NF-560 | |
| 1-5/8", EIA Standard | 1203-5; 158NF-5 |
158NF-560 | |
| 3-1/8", EIA Standard | 1303-5 | 318NF-5 | |
| 4-1/16" | 1403-5 | 416NF-5 | |
| 6-1/8", EIA Standard | 1603-5 | 618NF-5 | |
Slip Coupling |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8" | 1103-27 | 078NF-27 | |
| 1-5/8" | 1203-27 | 158NF-27 | |
| 3-1/8" standard | 1303-27; 318NF-27 | 318NF-520 | |
| 4-1/16" | 1403-27 | 416NF-27 | |
| 6-1/8" | 1603-27 | 618NF-27 | |
Connector Assembly |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 7/8" Shively-style | 1103-27S | 078NF-27S | |
| 1-5/8" Shively-style | 1203-27S | 158NF-27S | |
| 3-1/8" standard | 318NF-570 | ||
| 3-1/8" Shively-style | 1303-27S | 318NF-27S | |
| 4-1/16" Shively-style | 1403-27S; 416NF-27S |
416NF-550 | |
| 6-1/8" Shively-style | 1603-27S | 618NF-27S | |
Cutoff Guide |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 3-1/8" Outer, flanged & non-flanged | 1313-CG-O | 318-CG-O | |
| 3-1/8" Inner, flanged & non-flanged | 1313-CG-I | 318-CG-I | |
| 4-1/16" Outer, flanged & non-flanged | 1413-CG-O | 416-CG-O | |
| 4-1/16" Inner, flanged & non-flanged | 1413-CG-I | 416-CG-I | |
O-Ring, Silicone |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| For 7/8" | 1113-13S | 078F-13S | |
| For 1-5/8" | 1213-13S | 158F-13S | |
| For 2-1/8" | 1214-13S | 218F-13S | |
| For 3-1/8" | 1313-13S | 318F-13S | |
| For 4-1/16" | 1413-13S | 416F-13S | |
| For 6-1/8" | 1613-13S | 618F-13S | |
Hardware Kit, Spare |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| For 7/8" | 1113-14 | 078F-14 | |
| For 1-5/8" | 1213-14 | 158F-14 | |
| For 2-1/8" | 1214-14 | 218F-14 | |
| For 3-1/8" | 1313-14 | 318F-14 | |
| For 4-1/16" | 1413-14 | 416F-14 | |
| For 6-1/8" | 1613-14 | 618F-14 | |
Hose Clamp, Spare |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| For 7/8" | 1113-17 | 078F-17 | |
| For 1-5/8" | 1213-17 | 158F-17 | |
| For 2-1/8" | 1214-17 | 218F-17 | |
| For 3-1/8" | 1313-17 | 318F-17 | |
| For 4-1/16" | 1413-17; 416F-17 |
416F-020 | |
| For 6-1/8" | 1613-17 | 618F-17 | |
Patch Panel, 3-Port with 1 U-link |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 1-5/8" flanged | 1213-28 | 158F-28 | |
| 1-5/8" non-flanged | 1203-28 | 158NF-28 | |
| 3-1/8" flanged | 1313-28 | 318F-28 | |
| 3-1/8" non-flanged | 1303-28 | 318NF-28 | |
| 4-1/16" flanged | 1413-28 | 416F-28 | |
| 4-1-16" non-flanged | 1403-28 | 416NF-28 | |
| 6-1/8" flanged | 1613-28 | 618F-28 | |
| 6-1/8" non-flanged | 1603-28 | 618NF-28 | |
Patch Panel, 4-Port with 2 U-links |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 1-5/8" flanged | 1213-71 | 158F-71 | |
| 1-5/8" non-flanged | 1203-71 | 158NF-71 | |
| 3-1/8" flanged | 1313-71 | 318F-71 | |
| 3-1/8" non-flanged | 1303-71 | 318NF-71 | |
| 4-1/16" flanged | 1413-71 | 416F-71 | |
| 4-1-16" non-flanged | 1403-71 | 416NF-71 | |
| 6-1/8" flanged | 1613-71 | 618F-71 | |
| 6-1/8" non-flanged | 1603-71 | 618NF-71 | |
Patch Panel, 5-Port with 2 U-links |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 1-5/8" flanged | 1213-72 | 158F-72 | |
| 1-5/8" non-flanged | 1203-72 | 158NF-72 | |
| 3-1/8" flanged | 1313-72 | 318F-72 | |
| 3-1/8" non-flanged | 1303-72 | 318NF-72 | |
| 4-1/16" flanged | 1413-72 | 416F-72 | |
| 4-1-16" non-flanged | 1403-72 | 416NF-72 | |
| 6-1/8" flanged | 1613-72 | 618F-72 | |
| 6-1/8" non-flanged | 1603-72 | 618NF-72 | |
Patch Panel, 7-Port with 3 U-links |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| 1-5/8" flanged | 1213-29 | 158F-29 | |
| 1-5/8" non-flanged | 1203-29 | 158F-29 | |
| 3-1/8" flanged | 1313-29 | 318F-29 | |
| 3-1/8" non-flanged | 1303-29 | 318F-29 | |
| 4-1/16" flanged | 1413-29 | 416F-29 | |
| 4-1-16" non-flanged | 1403-29 | 416F-29 | |
| 6-1/8" flanged | 1613-29 | 6188F-29 | |
| 6-1/8" non-flanged | 1603-29 | 618F-29 | |
Patch Panel Interlock Micro-Switch |
|||
| Component Description | Olde Shively Part No. |
New Shively Part No. |
|
| Double-pole, double-throw switch | Interlock | 82INT | |
Last updated: 03/31/08
|