Shively Labs FM Antennas and Accessories
Home About Shively FM Antennas FM Filters & Combiners IBOC HDRadio™ Coax Components Other Products & Services Technical Information Solving Customer Needs

Dielectric-to-Shively Coax Component Cross-Reference

NOTES
All flange contact surfaces are EIA-standard, except 4-1/16", which use a 1.711" x 1.631" inner conductor. If in doubt about compatibility, contact Shively for recommendations.
Part numbers are new, effective July 2005.

1-5/8" Components

Dielectric
Part No.

Component Description


Corresponding Shively
Part No.

260-015 Flange, field, 1-5/8" EIA, swivel, clamp type 158F-990
265-002 Transmission line section, 1-5/8" x 20-ft non-flanged 158NF-2
265-007 Connector, inner conductor, 1-5/8" 158NF-560
265-008 Slip coupling, 1-5/8" 158NF-27
265-018 Elbow, 1-5/8" non-flanged, 90° unequal leg 158NF-3
265-020 Elbow, 1-5/8" non-flanged, 45° unequal leg 158NF-4
265-063 Adapter, 1-5/8" non-flange to Type "N" female 158NF-60
270-014 Flange, field, 1-5/8" EIA, swivel, soft solder type 158F-9FS
270-024 Cap, pressure, 1-5/8" EIA 158F-6F
275-002 Transmission line section, 1-5/8" x 20-ft EIA-flanged 158F-102
275-005 Gas stop, 1-5/8" EIA-flanged 158F-701
275-006 Transmission line section, 1-5/8" x cut length EIA-flanged 158F-12
275-011 Connector, 1-5/8" EIA anchor 158F-501
275-017 Elbow, 1-5/8" EIA flanged, 90° 158F-3F
275-041 Cutoff guide, inner conductor, 1-5/8" EIA-flanged 158-CG-I
275-060 Reducer, 1-5/8" EIA flange to 7/8" EIA flange 158F-620
275-063 Adapter, 1-5/8" EIA-flange to Type "N" female, brass 158F-600

3-1/8" Components

Dielectric
Part No.

Component Description


Corresponding Shively
Part No.

360-015 Flange, field, 3-1/8" EIA, swivel, clamp type 318F-990
360-040 Cutoff guide, outer conductor, 3-1/8" non-flanged

318-CG-O

365-002 Transmission line section, 3-1/8" x 20-ft non-flanged 318NF-2
365-007 Connector, inner conductor, 3-1/8" 318NF-5
365-008 Slip coupling, 3-1/8" 318NF-27
365-018 Elbow, 3-1/8" non-flanged, 90° unequal leg 318NF-321
365-020 Elbow, 3-1/8" non-flanged, 45° unequal leg 318NF-4
365-041 Cutoff guide, inner conductor, 3-1/8" non-flanged 318-CG-I
365-060 Reducer, 3-1/8" non-flange to 1-5/8" non-flange 318NF-62
365-063 Adapter, 3-1/8" non-flange to Type "N" female, brass 318NF-600
370-014 Flange, field, 3-1/8" EIA, swivel, soft solder type 318F-9FS
370-024 Cap, pressure, 3-1/8" EIA 318F-6F
370-040 Cutoff guide, outer conductor, 3-1/8" EIA-flanged

318-CG-O

375-002 Transmission line section, 3-1/8" x 20-ft EIA-flanged 318F-2
375-005 Gas stop, 3-1/8" EIA-flanged 318F-7
375-006 Transmission line section, 3-1/8" x cut length EIA-flanged 318F-12
375-011 Connector, 3-1/8" EIA anchor 318F-501
375-017 Elbow, 3-1/8"EIA flanged, 90° 318F-3F
375-041 Cutoff guide, inner conductor, 3-1/8" EIA-flanged 318-CG-I
375-060 Reducer, 3-1/8" EIA flange to 1-5/8" EIA flange 318F-630
375-061 Reducer, 3-1/8" EIA flange to 7/8" EIA flange, brass 318F-620
375-063 Adapter/Reducer, EIA 3-1/8" flange to Type "N" female, brass 318F-600

4-1/16" Components

CAUTION
Because there is no EIA standard for 4-1/16" line and components, there is a higher probability of brand-to-brand incompatibility in this size.
Dielectric
Part No.

Component Description


Corresponding Shively
Part No.

460-015 Flange, field, 4-1/16" EIA, swivel, clamp type 416F-9C
460-040 Cutoff guide, outer conductor, 4-1/16" non-flanged

416-CG-O

465-002 Transmission line section, 4-1/16 " x 20-ft non-flanged 416NF-2
465-007 Connector, inner conductor, 4-1/16" 416NF-5
465-008 Slip coupling, 4-1/16" 416NF-27
465-018 Elbow, 4-1/16" non-flanged, 90° unequal leg, Shively cutback 416NF-321
465-020 Elbow, 4-1/16" non-flanged, 45° unequal leg 416NF-4
465-041 Cutoff guide, inner conductor, 4-1/16" non-flanged 416-CG-I
470-014 Flange, field, 4-1/16" , swivel, soft solder type 416F-9FS
470-024 Cap, pressure, 4-1/16" 416F-6F
470-040 Cutoff guide, outer conductor, 4-1/16" flanged

416-CG-O

475-002 Transmission line section, 4-1/16 " x 20-ft flanged 416F-2
475-005 Gas stop, 4-1/16" flanged 416F-7
475-006 Transmission line section, 4-1/16" x cut length flanged 416F-12
475-011 Connector, 4-1/16" anchor 416F-5
475-017 Elbow, 4-1/16" flanged, 90° 416F-302
475-041 Cutoff guide, inner conductor, 4-1/16" flanged 416-CG-I
475-060 Reducer, 4-1/16" flanged to 3-1/8" flanged 416F-640
475-063 Adapter/Reducer, 4-1/16" flanged to Type "N" female 416F-60

6-1/8" Components

Dielectric
Part No.

Component Description


Corresponding Shively
Part No.

660-015 Flange, field, 6-1/8" EIA, swivel, clamp type, Shively cutback 618F-990
665-002 Transmission line section, 6-1/8" x 20-ft non-flanged 618NF-102
665-007 Connector, inner conductor, 6-1/8" 618NF-5
665-008 Slip coupling, 6-1/8" 618NF-27
665-018 Elbow, 6-1/8" non-flanged, 90° unequal leg, Shively cutback 618NF-321
665-020 Elbow, 6-1/8" non-flanged, 45° unequal leg 618NF-4
670-014 Flange, field, 6-1/8" EIA, swivel, soft solder type 618F-9FS
670-024 Cap, pressure, 6-1/8" EIA 618F-6F
675-002 Transmission line section, 6-1/8" x 20-ft EIA-flanged 618F-2
675-005 Gas stop, 6-1/8" EIA-flanged 618F-7
675-006 Transmission line section, 6-1/8" x cut length EIA-flanged 618F-12
675-011 Connector, 6-1/8" EIA anchor 618F-501
675-017 Elbow, 6-1/8" EIA flanged, 90°, non-reinforced 618F-322
675-041 Cutoff guide, inner conductor, 6-1/8" EIA-flanged 618-CG-I
675-060 Reducer, 6-1/8" EIA flange to 4-1/16" EIA flange 618F-64
675-061 Reducer, 6-1/8" EIA flange to 3-1/8" EIA flange 618F-63

Last updated: 03/31/08
Webmaster: Al Friend
© copyright 2006-2008 Howell Laboratories, Inc.