207-647-3327; 888-SHIVELY (888-744-8359); FAX 207-647-8273 5 PM - 8 AM Eastern, emergencies only please - cell: (207) 329-5118 |
||
| Employee Webmail | Shively E-Mail | |
|---|---|---|

| Antenna models | |
| Typical elevation patterns | |
| Icing Protection: | Radomes |
| De-Icers | |
| Transformers | |
| Related Information: | Tech bulletins |
| Tech sheets | |
| Bandpass filters | |
| Notch filters | |
| Branched combiners | |
| Balanced combiners | |
| Directional couplers | |
| Power splitters | |
| Low-level group delay equalizers | |
| Related information: | Tech bulletins |
| Tech sheets | |
| Calculators | |
| Shively Is Different! | |
| IBOC filter modules: | Medium-power |
| Low-power | |
| Very-low-power | |
| Digital injectors | |
| Interleaved A/D antenna | |
| Related information: | Tech bulletins |
| Tech sheets | |
| Calculators | |
| Shively filter selected for HD Radio™ demo in France. (May '06) | |
| 4 Times Square expands with new interdigital technology. (July '05) | |
| Revolutionary IBOC test at Cougar Mountain. (August '02) | |
| Shively's position on Dielectric's IBOC patents. | |
| CAUTION: All components are designed for use up to 108 MHz unless otherwise specified. Please contact Shively Labs for UHF components. | ||||
| Type "N" | ||||
| 7/8" | Flanged | Non-flanged | ||
| 1-5/8" | Flanged | Non-flanged | ||
| 3-1/8" | Flanged | Non-flanged | ||
| 4-1/16" | Flanged | Non-flanged | ||
| 6-1/8" | Flanged | Non-flanged | ||
| Cross-references: | ||||
| Old part numbers to new | ||||
| From Myat part numbers | ||||
| From Dielectric part numbers | ||||
| From SWR part numbers | ||||
| Related tech bulletins: | ||||
| Coax components specifications | ||||
| Patch panel dimensions (425 kB) | ||||
| Motorized transfer switches |
| Directional couplers |
| Digital injectors |
| Power splitters |
| Low-level group delay equalizers |
|
| Tough terrain, wicked weather, maximum coverage – nobody does it better! |
|
| NOTES | All flange contact surfaces are EIA-standard, except 4-1/16", which use a 1.711" x 1.631" inner conductor. If in doubt about compatibility, contact Shively for recommendations. |
|---|---|
Part numbers are new, effective July 2005. |
1-5/8" Components |
||
| SWR Part No. |
Component Description |
Corresponding Shively Part No. |
|---|---|---|
| 150512 | Connector, 1-5/8" EIA anchor | 158F-501 |
| 150556 | Flange, field, 1-5/8" EIA, clamp type | 158F-901 |
| 150557 | Kit, hardware, for 1-5/8" flange | 158F-010 |
| 150625 | Elbow, 1-5/8"EIA flanged, 90° equal legs | 158F-302 |
| 150627 | Elbow, 1-5/8" non-flanged, 90° unequal leg | 158NF-301 |
| 150751 | Connector assembly, non-flanged, 1-5/8" | 158NF-570 |
| UFL-150200 | Transmission line section, 1-5/8" x 20-ft non-flanged | 158NF-102 |
3-1/8" Components |
||
| SWR Part No. |
Component Description |
Corresponding Shively Part No. |
| 350512 | Connector, 3-1/8" EIA anchor | 318F-501 |
| 350556 | Flange, field, 3-1/8" EIA, clamp type | 318F-901 |
| 350557 | Kit, hardware, for 3-1/8" flange | 318F-010 |
| 350625 | Elbow, 3-1/8"EIA flanged, 90° equal legs | 318F-302 |
| 350627 | Elbow, 3-1/8" non-flanged, 90° unequal legs | 318NF-301 |
| 350700 | Adapter, 3-1/8" EIA flange to 1-5/8" EIA flange | 318F-630 |
| 350751 | Connector assembly, non-flanged, 3-1/8" | 318NF-570 |
| UFL-350200 | Transmission line section, 3-1/8" x 20-ft non-flanged | 318NF-102 |
4-1/16" Components |
||
| CAUTION | Because there is no EIA standard for 4-1/16" line and components, there is a higher probability of brand-to-brand incompatibility in this size. |
|
|---|---|---|
| SWR Part No. |
Component Description |
Corresponding Shively Part No. |
|---|---|---|
| 450512 | Connector, 4-1/16" anchor | 416F-501 |
| 450556 | Flange, field, 4-1/16" EIA, clamp type | 416F-901 |
| 450625 | Elbow, 4-1/16" flanged, 90° equal legs | 416F-302 |
| 450715 | Adapter, 4-1/16" flanged to 3-1/8" flanged | 416F-640 |
| 450725 | Adapter, 4-1/16" flanged to 1/5/8" flanged | 416F-630 |
| 450751 | Connector assembly, non-flanged, 4-1/16" | 416NF-570 |