Shively Labs FM Antennas and Accessories

	188 Harrison Rd., P.O. Box 389, Bridgton, Maine 04009 USA 207-647-3327; 888-SHIVELY (888-744-8359); FAX 207-647-8273 5 PM - 8 AM Eastern, emergencies only please - cell: (207) 329-5118
Employee Webmail	Shively E-Mail

Antenna models
Typical elevation patterns
Icing Protection:	Radomes
	De-Icers
Transformers
Related Information:	Tech bulletins
	Tech sheets

Shows
Visit our Jon Clark at Booth #712 at NRB, February 18-21, at the Gaylord Opryland Resort & Convention Ctr. in Nashville, TN.
Shively News
David Allen takes the helm as President of Howell Laboratories and Shively Labs.
Shively Labs forms new partnerships with EMC of Brazil and BWPSI of the Philippines.
Partnering with Ideal Antenas of Brazil.
Our freshly redesigned Model 2914 bandpass filter can now handle up to 1 kW input power!
Awards
Shively Labs has won a techINK 2010 Innovation Award for our Graphical Power Meter system!
Our Model 6020 antenna brings home the Radio World Coolstuff Award!
Articles
September-October 2011 Radio Guide article: "Shively Labs - Where FM Antennas Are Not Just a Sideline"
May-June 2008 Radio Guide article: "Shively Labs Meets the Very Windy Mountain" September 2007 Radio Guide articles: "Shively Labs: Antennas That Work!" [279 kB] "Shively 6014 Dual Hybrid Antenna Solves a Dilemma" [232 kB]
Archived articles

7/8" Flanged Coax Components

NOTES

All 7/8" components meet EIA standards for inner and outer conductor dimensions for 50-Ω components.
All 7/8” component flanges are EIA compatible.
All components come with one set of hardware and one O-ring unless otherwise specified.
All insulators are made from virgin PTFE.
See technical bulletin "tb-linespecs" for complete transmission line specifications.
See technical bulletin "tb-coax_cutback" for inner to outer cutback dimensions.

Performance:		Dimensions:
Impedance:	50 ohms	Outer Conductor	Outside diameter:	0.875" (2.22 cm)
Maximum Frequency:	6000 MHz		Inside diameter:	0.785" (1.99 cm)
Velocity Percent:	99.8%	Inner Conductor	Outside diameter:	0.341" (0.866 cm)
Peak Power Rating:	50 kW		Inside diameter:	0.291" (0.739 cm)
		Flange Diameter:		2-1/4" (5.72 cm)
		Bolt Circle:		1-3/4" (1.905 cm)
		Bolt Size:		1/4-20"

Transmission Line

Each transmission line section comes with one flange hardware kit and one O-ring. All transmission line comes with fixed flanges and male/female connections. Insulators are placed approximately 24" apart to prevent sagging. Swivel-flanged transmission line is available by contacting Shively Sales.

Flanged both ends 6 ft (72" or 182 cm) long 078F-101 Male/female connections.
Cut length xx.xxx inches 078F-103-xx.xxx Male/female connections.

Flanged both ends

6 ft (72" or 182 cm) long
078F-101

Male/female connections.

Cut length xx.xxx inches
078F-103-xx.xxx

Male/female connections.

	"Spool Piece" 078F-188 3-1/2" (8.9 cm) long. Flanged both ends. Female/female connections. Approximate weight 1 lb (0.45 kg) Approximate shippling weight 1.5 lb (0.68 kg)	Click picture for dimensions.

"Spool Piece"
078F-188

3-1/2" (8.9 cm) long.
Flanged both ends.
Female/female connections.
Approximate weight 1 lb (0.45 kg)
Approximate shippling weight 1.5 lb (0.68 kg)

Click picture for dimensions.

Flanged one end 6 ft (72" or 183 cm) long 078F-151 Male flanged connection.
Cut length xx.xxx inches 078F-153-xx.xxx Male flanged connection.

Flanged one end

6 ft (72" or 183 cm) long
078F-151

Male flanged connection.

Cut length xx.xxx inches
078F-153-xx.xxx

Male flanged connection.

Elbows

Each elbow comes with one flange hardware kit and one O-ring. Elbows come standard with swivel flanges and male/female connections.

90° unequal legs 078F-321 Swivel flanges. Male/female connections. Approximate weight 1.6 lb (0.73 kg) Approximate shippling weight 2.3 lb (1.04 kg) VSWR vs. frequency graph	Click picture for dimensions.

90° unequal legs
078F-321

Swivel flanges.
Male/female connections.
Approximate weight 1.6 lb (0.73 kg)
Approximate shippling weight 2.3 lb (1.04 kg)
VSWR vs. frequency graph

Click picture for dimensions.

Adapter/reducers

Each adapter/reducer comes with all connecting hardware and O-rings.

7/8" to Type "N" female, aluminum body 078F-601 Indoor use only - not pressurized. Approximate weight: 1/4 lb (0.11 kg) Approximate shipping weight: 1-1/4 lb (0.57 kg) VSWR vs. frequency graph	Click picture for dimensions.

7/8" to Type "N" female, aluminum body
078F-601

Indoor use only - not pressurized.
Approximate weight: 1/4 lb (0.11 kg)
Approximate shipping weight: 1-1/4 lb (0.57 kg)
VSWR vs. frequency graph

Click picture for dimensions.

	7/8" to Type "N" female, brass body 078F-600 Indoor use only - not pressurized. Approximate weight: 3/4 lb (0.37 kg) Approximate shipping weight: 1-3/4 lb (0.79 kg) VSWR vs. frequency graph	Click picture for dimensions.

7/8" to Type "N" female, brass body
078F-600

Indoor use only - not pressurized.
Approximate weight: 3/4 lb (0.37 kg)
Approximate shipping weight: 1-3/4 lb (0.79 kg)
VSWR vs. frequency graph

Click picture for dimensions.

7/8" flanged to 7-16 DIN female 078F-610 Brass body. Indoor use only.

7/8" flanged to 7-16 DIN female
078F-610

Brass body.
Indoor use only.

	7/8" flanged to 7-16 DIN male 078F-615 Brass body. Indoor use only.	Click picture for dimensions.

7/8" flanged to 7-16 DIN male
078F-615

Brass body.
Indoor use only.

Click picture for dimensions.

1-5/8" to 7/8" 158F-620 Approximate weight 2-1/4 lb (1.0 kg) Approximate shippling weight 2-1/2 lb (1.1 kg) VSWR vs. frequency graph	Click picture for dimensions.

1-5/8" to 7/8"
158F-620

Approximate weight 2-1/4 lb (1.0 kg)
Approximate shippling weight 2-1/2 lb (1.1 kg)
VSWR vs. frequency graph

Click picture for dimensions.

	3-1/8" to 7/8" 318F-620 Brass body. VSWR vs. frequency graph	Click picture for dimensions.

3-1/8" to 7/8"
318F-620

Brass body.
VSWR vs. frequency graph

Click picture for dimensions.

Field Flanges

Each flange comes with one flange hardware kit and one O-ring.

Swivel flange 078F-992 Soft-solder type. Can be pressurized. Approximate weight 1/2 lb (0.23 kg) Approximate shippling weight 1 lb (0.45 kg)

Swivel flange
078F-992

Soft-solder type.
Can be pressurized.
Approximate weight 1/2 lb (0.23 kg)
Approximate shippling weight 1 lb (0.45 kg)

	Fixed flange 078F-991 Soft-solder type. Can be pressurized. Approximate weight 1/2 lb (0.23 kg) Approximate shippling weight 1 lb (0.45 kg)

Fixed flange
078F-991

Soft-solder type.
Can be pressurized.
Approximate weight 1/2 lb (0.23 kg)
Approximate shippling weight 1 lb (0.45 kg)

Clamp-type 078F-901 Indoor use only - not pressurized Approximate weight 1/2 lb (0.23 kg) Approximate shippling weight 1 lb (0.45 kg)	Click picture for dimensions.

Clamp-type
078F-901

Indoor use only - not pressurized
Approximate weight 1/2 lb (0.23 kg)
Approximate shippling weight 1 lb (0.45 kg)

Click picture for dimensions.

Flanges

Each flange comes with one flange hardware kit and one O-ring.

Fixed flange 078F-925 Weld or silver-braze type.	Picture not yet available.

Fixed flange
078F-925

Weld or silver-braze type.

Picture not yet available.

Accessories

Gas stop 078F-701 1/8" inlet port. Comes with all connecting hardware and O-rings

Gas stop
078F-701

1/8" inlet port.
Comes with all connecting hardware and O-rings

	Anchor Connector Assembly 078F-501 To fit 7/8" EIA flanged connection. Connectors are silver-plated.	Click picture for dimensions.

Anchor Connector Assembly
078F-501

To fit 7/8" EIA flanged connection.
Connectors are silver-plated.

Click picture for dimensions.

Pressure cap, female connection 078F-402 Comes with one flange hardware kit and one O-ring.	Picture not yet available.

Pressure cap, female connection
078F-402

Comes with one flange hardware kit and one O-ring.

Picture not yet available.

	Pressure cap, male connection 078F-401 Comes with one flange hardware kit and one O-ring.	Picture not yet available.

Pressure cap, male connection
078F-401

Comes with one flange hardware kit and one O-ring.

Picture not yet available.

Spare Parts

O-Ring 078F-001 Silicone. Fits 7/8" flanges. Included with components.

O-Ring
078F-001

Silicone.
Fits 7/8" flanges.
Included with components.

	Hardware kit 078F-010 Stainless. Included with components. Includes (4) 1/4-20 x 1-1/2" long hex bolts, (4) 1/4-20 hex nuts, (4) 1/4" lock washers.

Hardware kit
078F-010

Stainless.
Included with components.
Includes (4) 1/4-20 x 1-1/2" long hex bolts, (4) 1/4-20 hex nuts, (4) 1/4" lock washers.

Hose clamp 078F-020 Fits 7/8" transmission line. Included with components.

Hose clamp
078F-020

Fits 7/8" transmission line.
Included with components.

Bandpass filters
Notch filters
Branched combiners
Balanced combiners
Directional couplers
Low-level group delay equalizers
Related information:	Tech bulletins
	Tech sheets
	Calculators

Shively Is Different!
IBOC filter modules:	Medium-power
	Low-power
	Very-low-power
Digital injectors
Interleaved A/D antenna
Related information:	Tech bulletins
	Tech sheets
	Calculators
Shively filter selected for HD Radio™ demo in France. (May '06)
4 Times Square expands with new interdigital technology. (July '05)
Revolutionary IBOC test at Cougar Mountain. (August '02)

Type "N"
7/8"		Flanged	Non-flanged
1-5/8"		Flanged	Non-flanged
3-1/8"		Flanged	Non-flanged
4-1/16"		Flanged	Non-flanged
6-1/8"		Flanged	Non-flanged
Cross-references:
	Old part numbers to new
	From Myat part numbers
	From Dielectric part numbers
	From SWR part numbers
Related tech bulletins:
	Coax components specifications
	Patch panel dimensions (425 kB)
CAUTION: All components are designed for use up to 108 MHz unless otherwise specified. Please contact Shively Labs for UHF components.

7/8" Flanged Coax Components

Performance:

Dimensions:

Transmission Line

Flanged both ends

6 ft (72" or 182 cm) long078F-101

Cut length xx.xxx inches078F-103-xx.xxx

"Spool Piece"078F-188

Click picture for dimensions.

Flanged one end

6 ft (72" or 183 cm) long078F-151

Cut length xx.xxx inches078F-153-xx.xxx

Elbows

90° unequal legs078F-321

Click picture for dimensions.

Adapter/reducers

7/8" to Type "N" female, aluminum body078F-601

Click picture for dimensions.

7/8" to Type "N" female, brass body078F-600

Click picture for dimensions.

7/8" flanged to 7-16 DIN female078F-610

7/8" flanged to 7-16 DIN male078F-615

Click picture for dimensions.

1-5/8" to 7/8"158F-620

Click picture for dimensions.

3-1/8" to 7/8"318F-620

Click picture for dimensions.

Field Flanges

Swivel flange078F-992

Fixed flange078F-991

Clamp-type078F-901

Click picture for dimensions.

Flanges

Fixed flange078F-925

Accessories

Gas stop078F-701

Anchor Connector Assembly078F-501

Click picture for dimensions.

Pressure cap, female connection078F-402

Pressure cap, male connection078F-401

Spare Parts

O-Ring078F-001

Hardware kit078F-010

Hose clamp078F-020

Last updated: 10/18/11 Webmaster: Al Friend © copyright 2006-2011 Howell Laboratories, Inc.

6 ft (72" or 182 cm) long
078F-101

Cut length xx.xxx inches
078F-103-xx.xxx

"Spool Piece"
078F-188

6 ft (72" or 183 cm) long
078F-151

Cut length xx.xxx inches
078F-153-xx.xxx

90° unequal legs
078F-321

7/8" to Type "N" female, aluminum body
078F-601

7/8" to Type "N" female, brass body
078F-600

7/8" flanged to 7-16 DIN female
078F-610

7/8" flanged to 7-16 DIN male
078F-615

1-5/8" to 7/8"
158F-620

3-1/8" to 7/8"
318F-620

Swivel flange
078F-992

Fixed flange
078F-991

Clamp-type
078F-901

Fixed flange
078F-925

Gas stop
078F-701

Anchor Connector Assembly
078F-501

Pressure cap, female connection
078F-402

Pressure cap, male connection
078F-401

O-Ring
078F-001

Hardware kit
078F-010

Hose clamp
078F-020

Last updated: 10/18/11
Webmaster: Al Friend
© copyright 2006-2011 Howell Laboratories, Inc.