Shively Labs FM Antennas and Accessories
Home About Shively FM Antennas FM Filters & Combiners IBOC HDRadio™ Coax Components Other Products & Services Technical Information Solving Customer Needs
Shows
Visit our Jon Clark at Booth #712
at NRB, February 18-21, at the Gaylord Opryland Resort & Convention Ctr. in Nashville, TN.
Shively News
David Allen takes the helm as President of Howell Laboratories and Shively Labs.
Shively Labs forms new partnerships with EMC of Brazil and BWPSI of the Philippines.
Partnering with Ideal Antenas of Brazil.
Our freshly redesigned Model 2914 bandpass filter can now handle up to 1 kW input power!
Awards
Shively Labs has won a techINK 2010 Innovation Award for our Graphical Power Meter system!
Innovation award logo
NAB logo
Our Model 6020 antenna brings home the Radio World Coolstuff Award!
Articles

newSeptember-October 2011 Radio Guide article: "Shively Labs - Where FM Antennas Are Not Just a Sideline"

May-June 2008 Radio Guide article:
"Shively Labs Meets the Very Windy Mountain"

September 2007
Radio Guide articles:
"Shively Labs: Antennas That Work!" [279 kB]

"Shively 6014 Dual Hybrid Antenna Solves a Dilemma" [232 kB]

Archived articles

7/8" Non-Flanged Coax Components

NOTES
  • All 7/8" components meet EIA standards for inner and outer conductor dimensions for 50-Ω components.
  • All insulators are made from virgin PTFE.
  • See technical bulletin "tb-linespecs" for complete transmission line specifications.
  • See technical bulletin "tb-coax_cutback" for inner to outer cutback dimensions.

Performance:

Dimensions:

Impedance: 50 ohms Outer Conductor Outside diameter: 0.875" (2.22 cm)
Maximum Frequency: 6000 MHz Inside diameter: 0.785" (1.99 cm)
Velocity Percent: 99.8% Inner Conductor Outside diameter: 0.341" (0.866 cm)
Peak Power Rating: 50 kW Inside diameter: 0.291" (0.739 cm)

Transmission Line
Non-flanged both ends

Each transmission line section comes without hardware or connectors. Insulators are placed approximately 24 " apart to prevent sagging.

6 ft (72" or 183 cm) long
078NF-101

Cut length xx.xxx inches
078NF-103-xx.xxx


Elbows

Each elbow comes with three insulators to support the inner conductor.

90° equal legs
078NF-301

  • Standard cutback
  • Approximate weight 1/4 lb (0.11 kg)
  • Approximate shippling weight 1-1/4 lb (0.57 kg)

Click on picture for dimensions.

Non-Flanged Adapter/Reducers

Use with non-flanged line only. Each comes with insulator and inner conductors. Connectors are silver-plated. Non-pressurizable; indoor use only.

7/8" to Type "N" female
078NF-601

  • Aluminum body.
  • Indoor use only - not pressurized.
  • Approximate weight 1/4 lb (0.11 kg)
  • Approximate shippling weight 1-1/4 lb (0.57 kg)

Click picture for dimensions.

7/8" to Type "N" female
078NF-600

  • Brass body.
  • Indoor use only - not pressurized.
  • Approximate weight 1/2 lb (0.23 kg)
  • Approximate shippling weight 1-1/2 lb (0.68 kg)

Click picture for dimensions.

7/8" to 7-16 DIN
078NF-610

  • One clamp only.
  • Indoor use only - not pressurized.
  • Approximate weight 3/4 lb (0.34 kg)
  • Approximate shippling weight 1-3/4 lb (0.79 kg)

Click picture for dimensions.

1-5/8" to 7/8"
158NF-631

  • Connectors silver-plated
  • Indoor use only - not pressurized.

3-1/8" to 7/8"
318NF-620

  • Indoor use only - not pressurized.

Picture not yet available.

Non-Flanged Connectors

Use with 7/8" EIA non-flanged line. Connectors are silver-plated. Non-pressurizable; indoor use only.

Inner conductor connector
078NF-530

  • Inner conductor only.
  • Connector silver-plated.
  • Indoor use only - not pressurized.
  • Not supported.

Click picture for dimensions.

Slip coupling
078NF-520

  • Outer conductor only.
  • Indoor use only - not pressurized.

Connector assembly
078NF-570

  • Connector silver-plated.
  • Indoor use only - not pressurized.

Spare Parts

Hose clamp
078F-020

  • Fits 7/8" transmission line.
  • Included with components.

Last updated: 08/22/11
Webmaster: Al Friend
© copyright 2006-2011 Howell Laboratories, Inc.