Shively Labs FM Antennas and Accessories

	188 Harrison Rd., P.O. Box 389, Bridgton, Maine 04009 USA 207-647-3327; 888-SHIVELY (888-744-8359); FAX 207-647-8273 5 PM - 8 AM Eastern, emergencies only please - cell: (207) 329-5118
Employee Webmail	Shively E-Mail

Antenna models
Typical elevation patterns
Icing Protection:	Radomes
	De-Icers
Transformers
Related Information:	Tech bulletins
	Tech sheets

Shows
Visit our Jon Clark at Booth #712 at NRB, February 18-21, at the Gaylord Opryland Resort & Convention Ctr. in Nashville, TN.
Shively News
David Allen takes the helm as President of Howell Laboratories and Shively Labs.
Shively Labs forms new partnerships with EMC of Brazil and BWPSI of the Philippines.
Partnering with Ideal Antenas of Brazil.
Our freshly redesigned Model 2914 bandpass filter can now handle up to 1 kW input power!
Awards
Shively Labs has won a techINK 2010 Innovation Award for our Graphical Power Meter system!
Our Model 6020 antenna brings home the Radio World Coolstuff Award!
Articles
September-October 2011 Radio Guide article: "Shively Labs - Where FM Antennas Are Not Just a Sideline"
May-June 2008 Radio Guide article: "Shively Labs Meets the Very Windy Mountain" September 2007 Radio Guide articles: "Shively Labs: Antennas That Work!" [279 kB] "Shively 6014 Dual Hybrid Antenna Solves a Dilemma" [232 kB]
Archived articles

1-5/8" Non-Flanged Coax Components

NOTES

All 1-5/8" components meet EIA standards for inner and outer conductor dimensions for 50-Ω components.
All insulators are made from virgin PTFE.
See technical bulletin "tb-linespecs" for complete transmission line specifications.
See technical bulletin "tb-coax_cutback" for inner to outer cutback dimensions.

Performance:		Dimensions:
Impedance:	50 ohms	Outer Conductor	Outside diameter:	1.625" (4.1 cm)
Maximum Frequency:	3000 MHz		Inside diameter:	1.527" (3.9 cm)
Velocity Percent:	99.8%	Inner Conductor	Outside diameter:	0.664" (1.7 cm)
Peak Power Rating:	150 kW		Inside diameter:	0.588" (1.5 cm)
Average Power Rating:	See technical bulletin.
Attenuation:	See technical bulletin.

Transmission Line
Non-flanged both ends

Each transmission line section comes without hardware or connectors. Insulators are placed approximately 24 " apart to prevent the inner conductor from sagging.

20 ft (240" or 6.10 m) long 158NF-102 Approximate weight: 24 lb (10.9 kg) Approximate shipping weight: 54 lb (24.5 kg)	Click picture for dimensions.
10 ft (120" or 3.05 m) long 158NF-101 Approximate weight: 12 lb 5.45 kg) Approximate shipping weight: 27 lb (12.3 kg)
Cut length xx.xxx inches 158NF-103-xx.xxx Approximate weight: 1.2 lb/ft (1.8 kg/m) Approximate shipping weight: 1.45 lb/ft (2.2 kg/m)

20 ft (240" or 6.10 m) long
158NF-102

Approximate weight: 24 lb (10.9 kg)
Approximate shipping weight: 54 lb (24.5 kg)

Click picture for dimensions.

10 ft (120" or 3.05 m) long
158NF-101

Approximate weight: 12 lb 5.45 kg)
Approximate shipping weight: 27 lb (12.3 kg)

Cut length xx.xxx inches
158NF-103-xx.xxx

Approximate weight: 1.2 lb/ft (1.8 kg/m)
Approximate shipping weight: 1.45 lb/ft (2.2 kg/m)

Elbows

Each elbow comes with supported inner conductor.

90° standard with equal legs 158NF-302 Approximate weight: 0.8 lb (0.36 kg) Approximate shipping weight: 1-1/2 lb (0.68 kg)	Click picture for dimensions.

90° standard with equal legs
158NF-302

Approximate weight: 0.8 lb (0.36 kg)
Approximate shipping weight: 1-1/2 lb (0.68 kg)

Click picture for dimensions.

	90° standard with unequal legs 158NF-301 Approximate weight: 1.0 lb (0.45 kg) Approximate shipping weight: 1-1/4 lb (0.57 kg)	Click picture for dimensions.

90° standard with unequal legs
158NF-301

Approximate weight: 1.0 lb (0.45 kg)
Approximate shipping weight: 1-1/4 lb (0.57 kg)

Click picture for dimensions.

Non-Flanged Adapter/Reducers

Use with non-flanged line only. Each comes with insulator and inner conductors. Connectors are silver-plated. Non-pressurizable; indoor use only.

3-1/8" to 1/5/8" 318NF-631 Indoor use only - not pressurized Standard cutback Approximate weight: 9 lb (4.1 kg) Approximate shipping weight: 9-1/2 lb (4.3 kg)	Click picture for dimensions.

3-1/8" to 1/5/8"
318NF-631

Indoor use only - not pressurized
Standard cutback
Approximate weight: 9 lb (4.1 kg)
Approximate shipping weight: 9-1/2 lb (4.3 kg)

Click picture for dimensions.

	1-5/8" to Type "N" female 158NF-600 One clamp only Connector silver-plated Indoor use only - not pressurized Approximate weight: 1/2 lb (0.23 kg) Approximate shipping weight: 1 lb (0.45 kg)	Click picture for dimensions.

1-5/8" to Type "N" female
158NF-600

One clamp only
Connector silver-plated
Indoor use only - not pressurized
Approximate weight: 1/2 lb (0.23 kg)
Approximate shipping weight: 1 lb (0.45 kg)

Click picture for dimensions.

1-5/8" to 7/8" 158NF-631 Connectors silver-plated Indoor use only - not pressurized

1-5/8" to 7/8"
158NF-631

Connectors silver-plated
Indoor use only - not pressurized

Non-Flanged Line Connectors

Use with 1-5/8" EIA non-flanged line. Connectors are silver-plated. Non-pressurizable; indoor use only.

Inner conductor connector 158NF-530 Inner conductor only Connector silver-plated Indoor use only - not pressurized Not supported Approximate weight: 1/4 lb (0.11 kg) Approximate shipping weight: 1 lb (0.45 kg)	Click picture for dimensions.

Inner conductor connector
158NF-530

Inner conductor only
Connector silver-plated
Indoor use only - not pressurized
Not supported
Approximate weight: 1/4 lb (0.11 kg)
Approximate shipping weight: 1 lb (0.45 kg)

Click picture for dimensions.

	Slip coupling 158NF-520 Outer conductor only Indoor use only - not pressurized Approximate weight: 1/4 lb (0.1 kg) Approximate shipping weight: 1 lb (0.45 kg)	Click picture for dimensions.

Slip coupling
158NF-520

Outer conductor only
Indoor use only - not pressurized
Approximate weight: 1/4 lb (0.1 kg)
Approximate shipping weight: 1 lb (0.45 kg)

Click picture for dimensions.

Connector assembly 158NF-570 Connector silver-plated Indoor use only - not pressurized Approximate weight: 3/4 lb (0.34 kg) Approximate shipping weight: 1 lb (0.45 kg)	Click picture for dimensions.

Connector assembly
158NF-570

Connector silver-plated
Indoor use only - not pressurized
Approximate weight: 3/4 lb (0.34 kg)
Approximate shipping weight: 1 lb (0.45 kg)

Click picture for dimensions.

Conversion "Field" Flanges and Anchor Connector

To convert from flanged to non-flanged line. Each flange comes with one flange hardware kit and one O-ring.

Clamp-type 158F-901 Fixed flange Standard cutback Indoor use only - not pressurized Approximate weight: 1 lb (0.45 kg) Approximate shipping weight: 2 lb (0.9 kg)	Click picture for dimensions.

Clamp-type
158F-901

Fixed flange
Standard cutback
Indoor use only - not pressurized
Approximate weight: 1 lb (0.45 kg)
Approximate shipping weight: 2 lb (0.9 kg)

Click picture for dimensions.

	Fixed flange 158F-902 Soft-solder type Standard cutback Can be pressurized Approximate weight: 1 lb (0.45 kg) Approximate shipping weight: 2 lb (0.90 kg)	Click picture for dimensions.

Fixed flange
158F-902

Soft-solder type
Standard cutback
Can be pressurized
Approximate weight: 1 lb (0.45 kg)
Approximate shipping weight: 2 lb (0.90 kg)

Click picture for dimensions.

Swivel flange 158F-903 Standard cutback Soft-solder type Can be pressurized Approximate weight: 1 lb (0.45 kg) Approximate shipping weight: 2 lb (0.90 kg)	Click picture for dimensions.

Swivel flange
158F-903

Standard cutback
Soft-solder type
Can be pressurized
Approximate weight: 1 lb (0.45 kg)
Approximate shipping weight: 2 lb (0.90 kg)

Click picture for dimensions.

	Anchor connector 158F-501 Inner conductor only. Connectors are silver-plated. Approximate weight: 1/4 lb (0.11 kg) Approximate shipping weight: 3/4 lb (0.34 kg)	Click picture for dimensions.

Anchor connector
158F-501

Inner conductor only.
Connectors are silver-plated.
Approximate weight: 1/4 lb (0.11 kg)
Approximate shipping weight: 3/4 lb (0.34 kg)

Click picture for dimensions.

Cutoff Guides

Use with 1-5/8" EIA non-flanged line.

For inner conductor 158F-065 Approximate weight: 1/2 lb (0.23 kg) Approximate shipping weight: 1 lb (0.45 kg)	Click picture for dimensions.

For inner conductor
158F-065

Approximate weight: 1/2 lb (0.23 kg)
Approximate shipping weight: 1 lb (0.45 kg)

Click picture for dimensions.

	For outer conductor 158F-060 Approximate weight: 1 lb (0.45 kg) Approximate shipping weight: 1-1/2 lb (0.68 kg)	Click picture for dimensions.

For outer conductor
158F-060

Approximate weight: 1 lb (0.45 kg)
Approximate shipping weight: 1-1/2 lb (0.68 kg)

Click picture for dimensions.

Spare Parts

Hose clamp 158F-020 Fits 1-5/8" transmission line. Included with components.

Hose clamp
158F-020

Fits 1-5/8" transmission line.
Included with components.

Patch Panels and Accessories

Note that interlock micro switches, P/N 82INT, are sold separately. See below.

3-Port, 1 U-bend 158NF-PP3		Click picture for dimensions.

	4-Port, 2 U-bends 158NF-PP4		Click picture for dimensions.

5-Port, 2 U-bends 158NF-PP5		Click picture for dimensions.

	7-Port, 3 U-bends 158NF-PP7		Click picture for dimensions.

Four-port motorized transfer switch 158NF-04MP Data sheet

	Patch panel interlock micro-switch 82INT Double-pole double-throw.

Patch panel interlock micro-switch
82INT

Double-pole double-throw.

Bandpass filters
Notch filters
Branched combiners
Balanced combiners
Directional couplers
Low-level group delay equalizers
Related information:	Tech bulletins
	Tech sheets
	Calculators

Shively Is Different!
IBOC filter modules:	Medium-power
	Low-power
	Very-low-power
Digital injectors
Interleaved A/D antenna
Related information:	Tech bulletins
	Tech sheets
	Calculators
Shively filter selected for HD Radio™ demo in France. (May '06)
4 Times Square expands with new interdigital technology. (July '05)
Revolutionary IBOC test at Cougar Mountain. (August '02)

Type "N"
7/8"		Flanged	Non-flanged
1-5/8"		Flanged	Non-flanged
3-1/8"		Flanged	Non-flanged
4-1/16"		Flanged	Non-flanged
6-1/8"		Flanged	Non-flanged
Cross-references:
	Old part numbers to new
	From Myat part numbers
	From Dielectric part numbers
	From SWR part numbers
Related tech bulletins:
	Coax components specifications
	Patch panel dimensions (425 kB)
CAUTION: All components are designed for use up to 108 MHz unless otherwise specified. Please contact Shively Labs for UHF components.

1-5/8" Non-Flanged Coax Components

Performance:

Dimensions:

Transmission LineNon-flanged both ends

20 ft (240" or 6.10 m) long158NF-102

Click picture for dimensions.

10 ft (120" or 3.05 m) long158NF-101

Cut length xx.xxx inches158NF-103-xx.xxx

Elbows

Each elbow comes with supported inner conductor.

90° standard with equal legs158NF-302

Click picture for dimensions.

90° standard with unequal legs158NF-301

Click picture for dimensions.

Non-Flanged Adapter/Reducers

3-1/8" to 1/5/8" 318NF-631

Click picture for dimensions.

1-5/8" to Type "N" female 158NF-600

Click picture for dimensions.

1-5/8" to 7/8"158NF-631

Non-Flanged Line Connectors

Inner conductor connector158NF-530

Click picture for dimensions.

Slip coupling158NF-520

Click picture for dimensions.

Connector assembly158NF-570

Click picture for dimensions.

Conversion "Field" Flanges and Anchor Connector

Clamp-type158F-901

Click picture for dimensions.

Fixed flange158F-902

Click picture for dimensions.

Swivel flange158F-903

Click picture for dimensions.

Anchor connector158F-501

Click picture for dimensions.

Cutoff Guides

For inner conductor158F-065

For outer conductor158F-060

Click picture for dimensions.

Spare Parts

Hose clamp158F-020

Patch Panels and Accessories

Note that interlock micro switches, P/N 82INT, are sold separately. See below.

3-Port, 1 U-bend158NF-PP3

Click picture for dimensions.

4-Port, 2 U-bends158NF-PP4

Click picture for dimensions.

5-Port, 2 U-bends158NF-PP5

Click picture for dimensions.

7-Port, 3 U-bends158NF-PP7

Click picture for dimensions.

Four-port motorized transfer switch 158NF-04MP

Data sheet

Patch panel interlock micro-switch 82INT

Last updated: 08/22/11 Webmaster: Al Friend © copyright 2006-2011 Howell Laboratories, Inc.

Transmission Line
Non-flanged both ends

20 ft (240" or 6.10 m) long
158NF-102

10 ft (120" or 3.05 m) long
158NF-101

Cut length xx.xxx inches
158NF-103-xx.xxx

90° standard with equal legs
158NF-302

90° standard with unequal legs
158NF-301

3-1/8" to 1/5/8"
318NF-631

1-5/8" to Type "N" female
158NF-600

1-5/8" to 7/8"
158NF-631

Inner conductor connector
158NF-530

Slip coupling
158NF-520

Connector assembly
158NF-570

Clamp-type
158F-901

Fixed flange
158F-902

Swivel flange
158F-903

Anchor connector
158F-501

For inner conductor
158F-065

For outer conductor
158F-060

Hose clamp
158F-020

3-Port, 1 U-bend
158NF-PP3

4-Port, 2 U-bends
158NF-PP4

5-Port, 2 U-bends
158NF-PP5

7-Port, 3 U-bends
158NF-PP7

Four-port motorized transfer switch
158NF-04MP

Patch panel interlock micro-switch
82INT

Last updated: 08/22/11
Webmaster: Al Friend
© copyright 2006-2011 Howell Laboratories, Inc.