Shively Labs FM Antennas and Accessories

	188 Harrison Rd., P.O. Box 389, Bridgton, Maine 04009 USA 207-647-3327; 888-SHIVELY (888-744-8359); FAX 207-647-8273 5 PM - 8 AM Eastern, emergencies only please - cell: (207) 329-5118
Employee Webmail	Shively E-Mail

Antenna models
Typical elevation patterns
Icing Protection:	Radomes
	De-Icers
Transformers
Related Information:	Tech bulletins
	Tech sheets

Shively News
Personnel changes: Joe Rohrer retires; Dale Ladner promoted to fill his shoes.
Shows
We'll be in Amsterdam at IBC 2010, September 10-14. Come see us at Stand 8.A13! For free guest passes, enter ticket #16078.
Awards
Shively Labs has won a techINK 2010 Innovation Award for our Graphical Power Meter system!
Our Model 6020 antenna brings home the Radio World Coolstuff Award!
Articles
May-June 2008 Radio Guide article: "Shively Labs Meets the Very Windy Mountain" September 2007 Radio Guide articles: "Shively Labs: Antennas That Work!" [279 kB] "Shively 6014 Dual Hybrid Antenna Solves a Dilemma" [232 kB]

4-1/16" Flanged Coax Components

NOTES

All 4-1/16" components meet 339 IEC 103-2 standard (size 50-103) for inner and outer conductor dimensions.
All 4-1/16" component flanges are 339 IEC 103-2 compatible. There is no EIA equivalent standard for 4-1/16".
All components come with one set of hardware and one O-ring unless otherwise specified.
All insulators are made from virgin PTFE.
See technical bulletin "tb-linespecs" for complete transmission line specifications.
See technical bulletin "tb-coax_cutback" for inner to outer cutback dimensions.

Performance:		Dimensions:
Impedance:	50 ohms	Outer Conductor	Outside diameter:	4.062" (10.32 cm)
Maximum Frequency:	1300 MHz		Inside diameter:	3.935" (10.00 cm)
Velocity Percent:	99.8%	Inner Conductor	Outside diameter:	1.711" (4.35 cm)
Peak Power Rating:	750 kW		Inside diameter:	1.631" (4.14 cm)
Average Power Rating:	See technical bulletin.	Flange Diameter:		6-1/4" (15.88 cm)
Attenuation:	See technical bulletin.	Bolt Circle:		5-3/8" (13.65 cm)
		Bolt Size:		3/8"

Transmission Line

Each transmission line section comes with one flange hardware kit (416F-14) and one O-ring (416F-13S). All transmission line comes with fixed flanges and male/female connections. Insulators are placed approximately 48 " apart to prevent the inner conductor from sagging. Swivel-flanged transmission line is available by contacting Shively Sales.

Male/female connections (male/female connections) 20 ft (240" or 6.10 m) long 416F-102 Approximate weight: 83 lb (37.7 kg) Approximate shipping weight: 113 lb (51.4 kg)	Click picture for dimensions.
10 ft (120" or 3.05 m) long 416F-101 Approximate weight: 45 lb (20.5 kg) Approximate shipping weight: 60 lb (27.3 kg)
Cut length xx.xxx inches 416F-103-xx.xxx Approximate weight: 7 lb + 3.8 lb/ft (3.2 kg + 5.7 kg/m) Approximate shipping weight: 7 lb + 5.1 lb/ft (3.2 kg + 7.6 kg/m)

Male/female connections
(male/female connections)

20 ft (240" or 6.10 m) long
416F-102

Approximate weight: 83 lb (37.7 kg)
Approximate shipping weight: 113 lb (51.4 kg)

Click picture for dimensions.

10 ft (120" or 3.05 m) long
416F-101

Approximate weight: 45 lb (20.5 kg)
Approximate shipping weight: 60 lb (27.3 kg)

Cut length xx.xxx inches
416F-103-xx.xxx

Approximate weight: 7 lb + 3.8 lb/ft (3.2 kg + 5.7 kg/m)
Approximate shipping weight: 7 lb + 5.1 lb/ft (3.2 kg + 7.6 kg/m)

	"Spool Piece" 416F-188 Male-to-female adapter. 6" (15.24 cm) long. Flanged both ends. Female/female connections. Approximate weight: 9-1/2 lb (4.3 kg) Approximate shipping weight: 10 lb (4.5 kg)	Click picture for dimensions.

"Spool Piece"
416F-188

Male-to-female adapter.
6" (15.24 cm) long.
Flanged both ends.
Female/female connections.
Approximate weight: 9-1/2 lb (4.3 kg)
Approximate shipping weight: 10 lb (4.5 kg)

Click picture for dimensions.

Flanged one end (male/female connections) 20 ft (240" or 6.10 m) long 416F-152 Approximate weight: 80.5 lb (36.6 kg) Approximate shipping weight: 110-1/2 lb (50.2 kg)	Click picture for dimensions.
10 ft (120" or 3.05 m) long 416F-151 Approximate weight: 42.5 lb (19.3 kg) Approximate shipping weight: 57.5 lb (26.1 kg)
Cut length xx.xxx inches 416F-153-xx.xxx Approximate weight: 4.5 lb + 3.8 lb/ft (2.0 kg + 5.7 kg/m) Approximate shipping weight: 4.5 + 5.1 lb/ft (2.0 kg + 7.5 kg/m)

Flanged one end
(male/female connections)

20 ft (240" or 6.10 m) long
416F-152

Approximate weight: 80.5 lb (36.6 kg)
Approximate shipping weight: 110-1/2 lb (50.2 kg)

Click picture for dimensions.

10 ft (120" or 3.05 m) long
416F-151

Approximate weight: 42.5 lb (19.3 kg)
Approximate shipping weight: 57.5 lb (26.1 kg)

Cut length xx.xxx inches
416F-153-xx.xxx

Approximate weight: 4.5 lb + 3.8 lb/ft (2.0 kg + 5.7 kg/m)
Approximate shipping weight: 4.5 + 5.1 lb/ft (2.0 kg + 7.5 kg/m)

Elbows

Each elbow comes with one flange hardware kit (416F-14) and one O-ring (416F-13S). Elbows come standard with swivel flanges and male/female connections.

90° elbow, equal legs 416F-302 Swivel flanges. Male/female connections. Approximate weight: 14-1/2 lb (6.6 kg) Approximate shipping weight: 15-1/4 lb (6.9 kg)	Click picture for dimensions.

90° elbow, equal legs
416F-302

Swivel flanges.
Male/female connections.
Approximate weight: 14-1/2 lb (6.6 kg)
Approximate shipping weight: 15-1/4 lb (6.9 kg)

Click picture for dimensions.

Adapter/reducers

Each adapter/reducer comes with all connecting hardware and O-rings.

4-1/16" to Type "N" female, aluminum body 416F-601 Indoor use only - not pressurized. Approximate weight: tbd Approximate shipping weight: tbd	Picture not yet available.

4-1/16" to Type "N" female, aluminum body
416F-601

Indoor use only - not pressurized.
Approximate weight: tbd
Approximate shipping weight: tbd

Picture not yet available.

	4-1/16" to Type "N" female, brass body 416F-600 Indoor use only - not pressurized. Approximate weight: tbd Approximate shipping weight: tbd	Picture not yet available.

4-1/16" to Type "N" female, brass body
416F-600

Indoor use only - not pressurized.
Approximate weight: tbd
Approximate shipping weight: tbd

Picture not yet available.

4-1/16" to 1-5/8" 416F-631 Approximate weight: 7 lb (3.2 kg) Approximate shipping weight: 7-1/2 lb (3.4 kg)	Click picture for dimensions.

4-1/16" to 1-5/8"
416F-631

Approximate weight: 7 lb (3.2 kg)
Approximate shipping weight: 7-1/2 lb (3.4 kg)

Click picture for dimensions.

	4-1/16" to 3-1/8" 416F-640 Approximate weight: 7.5 lb (3.4 kg) Approximate shipping weight: 8 lb (3.6 kg)	Click picture for dimensions.

4-1/16" to 3-1/8"
416F-640

Approximate weight: 7.5 lb (3.4 kg)
Approximate shipping weight: 8 lb (3.6 kg)

Click picture for dimensions.

6-1/8" to 4-1/16" 618F-650 Brass body. Approximate weight: 15 lb (6.8 kg) Approximate shipping weight: 16 lb (7.3 kg)	Click picture for dimensions.

6-1/8" to 4-1/16"
618F-650

Brass body.
Approximate weight: 15 lb (6.8 kg)
Approximate shipping weight: 16 lb (7.3 kg)

Click picture for dimensions.

Conversion "Field" Flanges and Anchor Connector

To convert from flanged to non-flanged line. Each flange comes with one flange hardware kit and one O-ring.

Clamp-type 416F-901 Non-pressurized (indoor use only) Approximate weight: 4-1/2 lb (2.0 kg) Approximate shipping weight: 5 lb (2.3 kg)

Clamp-type
416F-901

Non-pressurized (indoor use only)
Approximate weight: 4-1/2 lb (2.0 kg)
Approximate shipping weight: 5 lb (2.3 kg)

	Fixed flange 416F-902 Soft-solder type. Can be pressurized. Approximate weight: 4-1/2 lb (2.0 kg) Approximate shipping weight: 5 lb (2.3 kg)

Fixed flange
416F-902

Soft-solder type.
Can be pressurized.
Approximate weight: 4-1/2 lb (2.0 kg)
Approximate shipping weight: 5 lb (2.3 kg)

Swivel flange 416F-903 Soft-solder type. Can be pressurized. Approximate weight: 4-1/2 lb (2.0 kg) Approximate shipping weight: 5 lb (2.3 kg)

Swivel flange
416F-903

Soft-solder type.
Can be pressurized.
Approximate weight: 4-1/2 lb (2.0 kg)
Approximate shipping weight: 5 lb (2.3 kg)

	Anchor connector 416F-501 Inner conductor connector for 4-1/16" flanged connection. Connectors are silver-plated. Approximate weight: 3 lb (1.4 kg) Approximate shipping weight: 3-1/2 lb (1.6 kg)	Click picture for dimensions.

Anchor connector
416F-501

Inner conductor connector for
4-1/16" flanged connection.
Connectors are silver-plated.
Approximate weight: 3 lb (1.4 kg)
Approximate shipping weight: 3-1/2 lb (1.6 kg)

Click picture for dimensions.

Anchor connector, special 416F-510 Inner conductor connector/adapter for thin-wall (Dielectric-style) to standard-wall 4-1/16" flanged connection. Connectors are silver-plated. Approximate weight: 3 lb (1.4 kg) Approximate shipping weight: 3-1/2 lb (1.6 kg)	Click picture for dimensions.

Anchor connector, special
416F-510

Inner conductor connector/adapter for thin-wall (Dielectric-style) to standard-wall 4-1/16" flanged connection.
Connectors are silver-plated.
Approximate weight: 3 lb (1.4 kg)
Approximate shipping weight: 3-1/2 lb (1.6 kg)

Click picture for dimensions.

Flanges

Each flange comes with one flange hardware kit and one O-ring.

Fixed flange 416F-925 Weld or silver-braze type. Approximate weight: 2-1/2 lb (1.1 kg) Approximate shipping weight: 3 lb (1.4 kg)

Fixed flange
416F-925

Weld or silver-braze type.
Approximate weight: 2-1/2 lb (1.1 kg)
Approximate shipping weight: 3 lb (1.4 kg)

	Swivel flange 416F-926 Weld or silver-braze type. Approximate weight: 2-3/4 lb (1.3 kg) Approximate shipping weight: 3-1/4 lb (1.5 kg)

Swivel flange
416F-926

Weld or silver-braze type.
Approximate weight: 2-3/4 lb (1.3 kg)
Approximate shipping weight: 3-1/4 lb (1.5 kg)

Accessories

Gas Stop 416F-701 1/8" NPT pipe plug at inlet port. Comes with all connecting hardware and O-rings. Approximate weight: 8 lb (3.6 kg) Approximate shipping weight: 8-1/2 lb (3.9 kg)	Click picture for dimensions.

Gas Stop
416F-701

1/8" NPT pipe plug at inlet port.
Comes with all connecting hardware and O-rings.
Approximate weight: 8 lb (3.6 kg)
Approximate shipping weight: 8-1/2 lb (3.9 kg)

Click picture for dimensions.

	Pressure cap, female connection 416F-402 Comes with one flange hardware kit and one O-ring.	Click picture for dimensions.

Pressure cap, female connection
416F-402

Comes with one flange hardware kit and one O-ring.

Click picture for dimensions.

Pressure cap, male connection 416F-401 Comes with one flange hardware kit and one O-ring. Approximate weight: 4-1/2 lb (2.0 kg) Approximate shipping weight: 5 lb (2.3 kg)	Click picture for dimensions.

Pressure cap, male connection
416F-401

Comes with one flange hardware kit and one O-ring.
Approximate weight: 4-1/2 lb (2.0 kg)
Approximate shipping weight: 5 lb (2.3 kg)

Click picture for dimensions.

Spare Parts

O-Ring 416F-001 Silicone. Fits 4-1/16" flanges. Included with components.

O-Ring
416F-001

Silicone.
Fits 4-1/16" flanges.
Included with components.

	Hardware kit 416F-010 Stainless. Included with components. Includes (9) 3/8-16 x 1-3/4" long hex bolts, (9) 3/8-16 hex nuts, (9) 3/8" lock washers.

Hardware kit
416F-010

Stainless.
Included with components.
Includes (9) 3/8-16 x 1-3/4" long hex bolts, (9) 3/8-16 hex nuts, (9) 3/8" lock washers.

Hose clamp 416F-020 Stainless. Fits 4-1/16" transmission line. Included with components.

Hose clamp
416F-020

Stainless.
Fits 4-1/16" transmission line.
Included with components.

Bandpass filters
Notch filters
Branched combiners
Balanced combiners
Directional couplers
Power splitters
Low-level group delay equalizers
Related information:	Tech bulletins
	Tech sheets
	Calculators

Shively Is Different!
IBOC filter modules:	Medium-power
	Low-power
	Very-low-power
Digital injectors
Interleaved A/D antenna
Related information:	Tech bulletins
	Tech sheets
	Calculators
Shively filter selected for HD Radio™ demo in France. (May '06)
4 Times Square expands with new interdigital technology. (July '05)
Revolutionary IBOC test at Cougar Mountain. (August '02)
Shively's position on Dielectric's IBOC patents.

CAUTION: All components are designed for use up to 108 MHz unless otherwise specified. Please contact Shively Labs for UHF components.
Type "N"
7/8"		Flanged	Non-flanged
1-5/8"		Flanged	Non-flanged
3-1/8"		Flanged	Non-flanged
4-1/16"		Flanged	Non-flanged
6-1/8"		Flanged	Non-flanged
Cross-references:
	Old part numbers to new
	From Myat part numbers
	From Dielectric part numbers
	From SWR part numbers
Related tech bulletins:
	Coax components specifications
	Patch panel dimensions (425 kB)

4-1/16" Flanged Coax Components

Performance:

Dimensions:

Transmission Line

Male/female connections(male/female connections)

20 ft (240" or 6.10 m) long416F-102

Click picture for dimensions.

10 ft (120" or 3.05 m) long416F-101

Cut length xx.xxx inches416F-103-xx.xxx

"Spool Piece"416F-188

Click picture for dimensions.

Flanged one end(male/female connections)

20 ft (240" or 6.10 m) long416F-152

Click picture for dimensions.

10 ft (120" or 3.05 m) long416F-151

Cut length xx.xxx inches416F-153-xx.xxx

Elbows

90° elbow, equal legs416F-302

Click picture for dimensions.

Adapter/reducers

4-1/16" to Type "N" female, aluminum body416F-601

4-1/16" to Type "N" female, brass body416F-600

4-1/16" to 1-5/8"416F-631

Click picture for dimensions.

4-1/16" to 3-1/8"416F-640

Click picture for dimensions.

6-1/8" to 4-1/16"618F-650

Click picture for dimensions.

Conversion "Field" Flanges and Anchor Connector

Clamp-type416F-901

Fixed flange416F-902

Swivel flange416F-903

Anchor connector416F-501

Click picture for dimensions.

Anchor connector, special416F-510

Click picture for dimensions.

Flanges

Fixed flange416F-925

Swivel flange416F-926

Accessories

Gas Stop416F-701

Click picture for dimensions.

Pressure cap, female connection416F-402

Click picture for dimensions.

Pressure cap, male connection416F-401

Click picture for dimensions.

Spare Parts

O-Ring416F-001

Hardware kit416F-010

Hose clamp416F-020

Last updated: 04/01/10 Webmaster: Al Friend © copyright 2006-2010 Howell Laboratories, Inc.

Male/female connections
(male/female connections)

20 ft (240" or 6.10 m) long
416F-102

10 ft (120" or 3.05 m) long
416F-101

Cut length xx.xxx inches
416F-103-xx.xxx

"Spool Piece"
416F-188

Flanged one end
(male/female connections)

20 ft (240" or 6.10 m) long
416F-152

10 ft (120" or 3.05 m) long
416F-151

Cut length xx.xxx inches
416F-153-xx.xxx

90° elbow, equal legs
416F-302

4-1/16" to Type "N" female, aluminum body
416F-601

4-1/16" to Type "N" female, brass body
416F-600

4-1/16" to 1-5/8"
416F-631

4-1/16" to 3-1/8"
416F-640

6-1/8" to 4-1/16"
618F-650

Clamp-type
416F-901

Fixed flange
416F-902

Swivel flange
416F-903

Anchor connector
416F-501

Anchor connector, special
416F-510

Fixed flange
416F-925

Swivel flange
416F-926

Gas Stop
416F-701

Pressure cap, female connection
416F-402

Pressure cap, male connection
416F-401

O-Ring
416F-001

Hardware kit
416F-010

Hose clamp
416F-020

Last updated: 04/01/10
Webmaster: Al Friend
© copyright 2006-2010 Howell Laboratories, Inc.