Shively Labs FM Antennas and Accessories

	188 Harrison Rd., P.O. Box 389, Bridgton, Maine 04009 USA 207-647-3327; 888-SHIVELY (888-744-8359); FAX 207-647-8273 5 PM - 8 AM Eastern, emergencies only please - cell: (207) 329-5118
Employee Webmail	Shively E-Mail

Antenna models
Typical elevation patterns
Icing Protection:	Radomes
	De-Icers
Transformers
Related Information:	Tech bulletins
	Tech sheets

Shows
Visit our Jon Clark at Booth #712 at NRB, February 18-21, at the Gaylord Opryland Resort & Convention Ctr. in Nashville, TN.
Shively News
David Allen takes the helm as President of Howell Laboratories and Shively Labs.
Shively Labs forms new partnerships with EMC of Brazil and BWPSI of the Philippines.
Partnering with Ideal Antenas of Brazil.
Our freshly redesigned Model 2914 bandpass filter can now handle up to 1 kW input power!
Awards
Shively Labs has won a techINK 2010 Innovation Award for our Graphical Power Meter system!
Our Model 6020 antenna brings home the Radio World Coolstuff Award!
Articles
September-October 2011 Radio Guide article: "Shively Labs - Where FM Antennas Are Not Just a Sideline"
May-June 2008 Radio Guide article: "Shively Labs Meets the Very Windy Mountain" September 2007 Radio Guide articles: "Shively Labs: Antennas That Work!" [279 kB] "Shively 6014 Dual Hybrid Antenna Solves a Dilemma" [232 kB]
Archived articles

4-1/16" Non-Flanged Coax Components

NOTES

All 4-1/16" components meet 339 IEC 103-2 standard (size 50-103) for inner and outer conductor dimensions.
All insulators are made from virgin PTFE.
See technical bulletin "tb-linespecs" for complete transmission line specifications.
See technical bulletin "tb-coax_cutback" for inner to outer cutback dimensions.

Performance:		Dimensions:
Impedance:	50 ohms	Outer Conductor	Outside diameter:	4.062" (10.32 cm)
Maximum Frequency:	1300 kHz		Inside diameter:	3.935" (10.00 cm)
Velocity Percent:	99.8%	Inner Conductor	Outside diameter:	1.711" (4.35 cm)
Peak Power Rating:	750 kW		Inside diameter:	1.631" (4.14 cm)
Average Power Rating:	See technical bulletin.
Attenuation:	See technical bulletin.

Transmission Line
Non-flanged both ends

Each transmission line section comes without hardware or connectors. Insulators are placed approximately 48 " apart to prevent the inner conductor from sagging.

20 ft (240" or 6.10 m) long 416NF-102 Approximate weight: 76 lb (34.5 kg) Approximate shipping weight: 106 lb (48.2 kg)	Click picture for dimensions.
10 ft (120" or 3.05 m) long 416NF-101 Approximate weight: 38 lb (17.3 kg) Approximate shipping weight: 50 lb (22.7 kg)
Cut length xx.xxx inches 416NF-103-xx.xxx Approximate weight: 3.8 lb per foot (5.7 kg/m) Approximate shipping weight: 5.1 lb/ft (7.5 kg/m)

20 ft (240" or 6.10 m) long
416NF-102

Approximate weight: 76 lb (34.5 kg)
Approximate shipping weight: 106 lb (48.2 kg)

Click picture for dimensions.

10 ft (120" or 3.05 m) long
416NF-101

Approximate weight: 38 lb (17.3 kg)
Approximate shipping weight: 50 lb (22.7 kg)

Cut length xx.xxx inches
416NF-103-xx.xxx

Approximate weight: 3.8 lb per foot
(5.7 kg/m)
Approximate shipping weight: 5.1 lb/ft (7.5 kg/m)

Elbows

Each elbow comes with three insulators to support the inner conductor.

90° unequal legs 416NF-301 Approximate weight: 8 lb (3.6 kg) Approximate shipping weight: 9-1/2 lb (4.3 kg)	Click picture for dimensions.

90° unequal legs
416NF-301

Approximate weight: 8 lb (3.6 kg)
Approximate shipping weight: 9-1/2 lb (4.3 kg)

Click picture for dimensions.

	90° equal legs 416NF-302 Approximate weight: 7 lb (3.6 kg)	Click picture for dimensions.

90° equal legs
416NF-302

Approximate weight: 7 lb (3.6 kg)

Click picture for dimensions.

Non-Flanged Line Connectors

Use with 4-1/16" EIA non-flanged line. Connectors are silver-plated. Non-pressurizable; indoor use only.

Inner conductor connector 416NF-530 Inner conductor only. Connector silver-plated. Indoor use only - not pressurized. Not supported. Approximate weight: 1/2 lb (0.2 kg) Approximate shipping weight: 3/4 lb (0.3 kg)	Click picture for dimensions.

Inner conductor connector
416NF-530

Inner conductor only.
Connector silver-plated.
Indoor use only - not pressurized.
Not supported.
Approximate weight: 1/2 lb (0.2 kg)
Approximate shipping weight: 3/4 lb (0.3 kg)

Click picture for dimensions.

	Slip coupling 416NF-520 Outer conductor only. Indoor use only - not pressurized. Approximate weight: 1-1/4 lb (0.6 kg) Approximate shipping weight: 1-3/4 lb (0.8 kg)	Click picture for dimensions.

Slip coupling
416NF-520

Outer conductor only.
Indoor use only - not pressurized.
Approximate weight: 1-1/4 lb (0.6 kg)
Approximate shipping weight: 1-3/4 lb (0.8 kg)

Click picture for dimensions.

Connector assembly 416NF-570 Outer and inner conductors. Indoor use only - not pressurized. Approximate weight: 1-1/4 lb (0.6 kg) Approximate shipping weight: 1-3/4 lb (0.8 kg)

Connector assembly
416NF-570

Outer and inner conductors.
Indoor use only - not pressurized.
Approximate weight: 1-1/4 lb (0.6 kg)
Approximate shipping weight: 1-3/4 lb (0.8 kg)

Conversion "Field" Flanges and Anchor Connector

To convert from flanged to non-flanged line. Each flange comes with one flange hardware kit and one O-ring.

Clamp-type 416F-901 Non-pressurized (indoor use only) Approximate weight: 4-1/2 lb (2.0 kg) Approximate shipping weight: 5 lb (2.3 kg)

Clamp-type
416F-901

Non-pressurized (indoor use only)
Approximate weight: 4-1/2 lb (2.0 kg)
Approximate shipping weight: 5 lb (2.3 kg)

	Fixed flange 416F-902 Soft-solder type. Can be pressurized. Approximate weight: 4-1/2 lb (2.0 kg) Approximate shipping weight: 5 lb (2.3 kg)

Fixed flange
416F-902

Soft-solder type.
Can be pressurized.
Approximate weight: 4-1/2 lb (2.0 kg)
Approximate shipping weight: 5 lb (2.3 kg)

Swivel flange 416F-903 Soft-solder type. Can be pressurized. Approximate weight: 4-1/2 lb (2.0 kg) Approximate shipping weight: 5 lb (2.3 kg)

Swivel flange
416F-903

Soft-solder type.
Can be pressurized.
Approximate weight: 4-1/2 lb (2.0 kg)
Approximate shipping weight: 5 lb (2.3 kg)

	Anchor connector 416F-501 Inner conductor connector for 4-1/16" flanged connection. Connectors are silver-plated. Approximate weight: 3 lb (1.4 kg) Approximate shipping weight: 3-1/2 lb (1.6 kg)	Click picture for dimensions.

Anchor connector
416F-501

Inner conductor connector for 4-1/16" flanged connection.
Connectors are silver-plated.
Approximate weight: 3 lb (1.4 kg)
Approximate shipping weight: 3-1/2 lb (1.6 kg)

Click picture for dimensions.

Cutoff Guides

Use with 4-1/16" EIA non-flanged line.

For inner conductor 416F-065 Approximate weight: 2 lb (0.9 kg) Approximate shipping weight: 2-1/2 lb (1.1 kg)	Click picture for dimensions.

For inner conductor
416F-065

Approximate weight: 2 lb (0.9 kg)
Approximate shipping weight: 2-1/2 lb (1.1 kg)

Click picture for dimensions.

	For outer conductor 416F-060 Approximate weight: 2-1/2 lb (1.1 kg) Approximate shipping weight: 3 lb (1.4 kg)	Click picture for dimensions.

For outer conductor
416F-060

Approximate weight: 2-1/2 lb (1.1 kg)
Approximate shipping weight: 3 lb (1.4 kg)

Click picture for dimensions.

Spare Parts

Hose clamp 416F-020 Fits 4-1/16" transmission line. Included with components.

Hose clamp
416F-020

Fits 4-1/16" transmission line.
Included with components.

Bandpass filters
Notch filters
Branched combiners
Balanced combiners
Directional couplers
Low-level group delay equalizers
Related information:	Tech bulletins
	Tech sheets
	Calculators

Shively Is Different!
IBOC filter modules:	Medium-power
	Low-power
	Very-low-power
Digital injectors
Interleaved A/D antenna
Related information:	Tech bulletins
	Tech sheets
	Calculators
Shively filter selected for HD Radio™ demo in France. (May '06)
4 Times Square expands with new interdigital technology. (July '05)
Revolutionary IBOC test at Cougar Mountain. (August '02)

Type "N"
7/8"		Flanged	Non-flanged
1-5/8"		Flanged	Non-flanged
3-1/8"		Flanged	Non-flanged
4-1/16"		Flanged	Non-flanged
6-1/8"		Flanged	Non-flanged
Cross-references:
	Old part numbers to new
	From Myat part numbers
	From Dielectric part numbers
	From SWR part numbers
Related tech bulletins:
	Coax components specifications
	Patch panel dimensions (425 kB)
CAUTION: All components are designed for use up to 108 MHz unless otherwise specified. Please contact Shively Labs for UHF components.

4-1/16" Non-Flanged Coax Components

Performance:

Dimensions:

Transmission LineNon-flanged both ends

20 ft (240" or 6.10 m) long416NF-102

Click picture for dimensions.

10 ft (120" or 3.05 m) long416NF-101

Cut length xx.xxx inches416NF-103-xx.xxx

Elbows

90° unequal legs416NF-301

Click picture for dimensions.

90° equal legs416NF-302

Click picture for dimensions.

Non-Flanged Line Connectors

Inner conductor connector416NF-530

Click picture for dimensions.

Slip coupling416NF-520

Click picture for dimensions.

Connector assembly416NF-570

Conversion "Field" Flanges and Anchor Connector

Clamp-type416F-901

Fixed flange416F-902

Swivel flange416F-903

Anchor connector416F-501

Click picture for dimensions.

Cutoff Guides

For inner conductor416F-065

Click picture for dimensions.

For outer conductor416F-060

Click picture for dimensions.

Spare Parts

Hose clamp416F-020

Last updated: 06/07/11 Webmaster: Al Friend © copyright 2006-2011 Howell Laboratories, Inc.

Transmission Line
Non-flanged both ends

20 ft (240" or 6.10 m) long
416NF-102

10 ft (120" or 3.05 m) long
416NF-101

Cut length xx.xxx inches
416NF-103-xx.xxx

90° unequal legs
416NF-301

90° equal legs
416NF-302

Inner conductor connector
416NF-530

Slip coupling
416NF-520

Connector assembly
416NF-570

Clamp-type
416F-901

Fixed flange
416F-902

Swivel flange
416F-903

Anchor connector
416F-501

For inner conductor
416F-065

For outer conductor
416F-060

Hose clamp
416F-020

Last updated: 06/07/11
Webmaster: Al Friend
© copyright 2006-2011 Howell Laboratories, Inc.