8AM - 5PM EST 1-888-SHIVELY Contact

6016

Model: 6016

This is a Circular Polarized Panel system. Designed for up to 160 kW. Pattern Studies and Directional Patterns are available.

  • Designed for 3 or 4 Sided Towers
  • Broadband from 87.5 to 108 MHz
  • Directional options available

Performance Specifications

  • Polarization: Right Circular
  • VSWR: Under 1.2 :1 over FM band

Input Connection: Sized for your needs, contact factory

SKU: 6016

Description

Model: 6016

This is a Circular Polarized Panel system. Designed for up to 160 kW. Pattern Studies and Directional Patterns are available.

  • Designed for 3 or 4 Sided Towers
  • Broadband from 87.5 to 108 MHz
  • Directional options available

Performance Specifications

  • Polarization: Right Circular
  • VSWR: Under 1.2 :1 over FM band

Input Connection: Sized for your needs, contact factory

Reviews

There are no reviews yet.

Be the first to review “6016”

Your email address will not be published. Required fields are marked *

Electrical Specifications
Options
Installation & Mounting
Typical Patterns

Model 6016 Full-wave Spaced

Electrical specifications (United States)

No. of BaysGainPower Rating
PowerdbkW
10.45-3.4360
20.99-0.04120
31.561.92160
42.143.30160
52.734.36160
63.335.22160
73.935.94160
84.536.56160

Electrical specifications (International)

No. of BaysGainPower Rating
PowerdbkW
11.020.0760
21.902.79120
32.794.45160
43.675.65160
54.566.59160
65.447.36160
76.338.01160
87.208.57160

***Our gain figures are calculated by factoring the directivity to allow for losses in the radiating system. Due to this conservative approach, you are assured of radiating maximum ERP by using Shively’s published gain figures. Gain is provided for one polarization and is equal in circularly polarized antennas for both horizontal and vertical components. Gain will be reduced if special H/V ratio or special wavelength spacing is provided.

Options

  • Custom Mounts
  • Customer feed systems
  • Adapters

Replacement Parts

  • Dipole
  • Cables
  • Power Dividers

No Factory personal needed for installation. Please read the installation manual in full before assembly on site.

Installation & Mounting Layout

Model 6016 Antenna Weight & Wind Load

Size and Weight Full-wave Spaced

No. of Levels
(4 panels each)
Vertical Tower SpaceWeight
Antenna Radiation ApertureTotal tower space recommendedWithout IceWith 1/2" (1.2 cm) radial ice
ftmlbNlbN
1206.1206.1961427317347709
2209.1309.119218541346715414
34012.24012.2288212813520123123
45015.25015.2384317086693530832
56018.36018.3480421358866938542
67021.37021.35764256261040246246
78024.48024.46725298991213653955
88024.49027.47686341711387061665

Windload Full-wave Spaced

No. of levels
(4 panels each)
Revision "G", 112 mph (180 kph)Revision "G", 40 mph (64 kph) with 1/2" radial ice
EPANEPATEPANEPAT
ft2m2ft2m2ft2m2ft2m2
1716.6464.316315.1999.2
214113.1938.632630.319918.5
321219.713912.948845.329827.7
428326.318617.365160.539837.0
535432.923221.681475.649746.2
642439.427925.997790.859655.4
749546.032530.21140105.969664.7
856652.637234.61303121.179573.9

Notes:
WINDLOAD TABLE(S)

1. Standard mounts are designed to fit customer-supplied 1-1/4″ ips (1.5″ OD) – 3″ pipe (3.5″ OD) pole or tower leg.

2. Windload and weight tabulations are estimates and assume 98 MHz. No values are included for mounts. The values for mounts, complex feed systems and directional arrays may significantly affect these estimates. Shielding due to the tower has not been accounted for. Please contact the factory for an estimate for a system to meet your specific requirements.

3. Antenna areas and weights calculated in accordance with TIA-222-G.

  • EPAN – Effective projected area associated with the windward face normal to the azimuth of the antenna: EPAN = ∑(CaAA)N
  • EPAT – Effective projected area associated with the windward face at the side of the antenna: EPAT=∑(CaAA)T
  • Assumptions: Structure Class II; Exposure Category C; Topographic Category 1; Maximum basic windspeed 120 mph; with 1/2 inch radial ice, 40 mph.

4. Elements can be stacked or arrayed for omni or directional patterns.

5. System designed for maximum of 2″ factored radial ice (tis) at height using TIA-222-G specifications and maximum velocity pressure of 51.29 lbf/ft2 with no ice.

6. Ask for technical assistance at Shively if you are planning to mount antennas on AM towers or install them at altitudes over 3,000ft (915m) above mean sea level.ers or install them at altitudes over 3,000 ft (915 m) above mean sea level.

Typical Elevation Patterns

These patterns are based on 98.1 MHz, no beam tilt, no null fill. Contact factory for your customized elevation pattern

6016 Elevation Patterns Full-wave

Sample Azimuth Patterns

NOTE: Model 6016 is a directional antenna.

6016 Sample Azimuth Patterns

SKU: 6016 CATEGORY: TAGS: